A non-functioning temperature gauge in a 2005 GMC Yukon Denali could be due to several reasons, including a faulty temperature sending unit, a malfunctioning gauge itself, or issues with the wiring or connections in the dashboard. Additionally, a blown fuse or a problem with the vehicle's engine control module (ECM) might also cause the gauge to fail. It's advisable to perform a diagnostic check to pinpoint the exact cause for accurate repairs.
In a 2004 Yukon Denali, the fuse for the temperature gauge is typically located in the fuse box under the dashboard on the driver's side. You may also find additional fuses in the engine compartment fuse box. To identify the specific fuse, refer to the owner's manual for the exact location and designation of the temperature gauge fuse. Always ensure the vehicle is turned off before checking or replacing any fuses.
It is possible that the temperature gauge has stopped working in a 1992 Tempo due to a blown fuse. It is also possible that the temperature gauge stopped working do to the temperature sensor in the engine having a short.
Temperature gauge not moved and the fan's always are working
A faulty temperature sensor, a wiring issue, or a blown fuse could cause a temperature gauge to stop working. It could also be due to a malfunction in the gauge itself.
The gauge could be bad, the fuel gauge sending unit in the gas tank as part fo the fuel pump could be bad you could have a bad ground wire you could have a broken wire in the harness runnign from the fuel tank to the gauge.
If the temperature gauge is not working, one thing it could be besides the gauge itself is a blown fuse. Another possibility is a loose or broken wire on the gauge.Ê
If your temperature gauge isn't working the problem is a bad gauge, grounded or disconnected wiring or, most likely, the temp sender isn't working.
Low Coolant? Weak Temerature sensor? Weak gauge Gauge working properly and recording the thermostat opening and closing as engine temperature fluctuates
=A Gage is gun a 12 gage=
temperature gauge not working can be caused by a bad temp sensor in engine, a bad gauge in dash, or a bad fuse
An inoperative temperature gauge will not alter how an engine runs, but the operator will not know if the water temperature has risen above normal without a properly working guage.
15