You need to check the brake light switch if the bulbs are good. They had a problem with the circuit boards that the bulb are inserted in. If none of these are the problem then if you do not have a short, your turn signal switch is bad.
The head light switch is shorting out ,or a bad connection
where can i find a diagram for a 1997 chevy s10 brake switch?
a blown bulb or loose wire.
You probably need to replace your brake light switch. It's near the top of the brake assembly, beyond a trim panel. The fact that all three brake lights don't work rules out problems in the multifunction switch (the cause of similar problems affecting only the two rear lights.)
Brake light switch out of adjustment or defective
its just a fuse, look for a fuse panel there are two. one under the dash and the other under the hood.
Check fuse, check bulbs, check brake light switch, check wiring and then check signal switch, in that order.
change the headlight switch it controls the running lights....$15 at autozone
Probably a misadjusted or defective brake light switch.
Check the bulbs, Check the fuse, Check the brake light switch, in that order.
1997 S10 headlights don't work, dimmer lights are the only ones working?
Closing the door turns off interior lights on a 1997 Chevy S10 because there is a switch in the door jamb that closes when the door shuts. When the door opens, the switch opens.