0
What else can I help you with?
How do turning vehicles ensure that the rear wheels follow the path of the front wheels?
Turning vehicles ensure that the rear wheels follow the path of the front wheels through a mechanism called the steering system. This system allows the front wheels to turn, causing the rear wheels to also change direction accordingly, maintaining alignment and ensuring that the vehicle follows a smooth and coordinated path during turns.
How does the speed of the wheels varies in differential gear?
spyder gears allow the rear or front wheels to rotate at different speeds wich is what wheels do while turning, the wheels travel at dif speeds
What causes rear end of car not want to turn when turning?
If effort is not given to steering wheel, front wheels also would not turn. When a turn is taken, no such effort is given to rear wheels for turning because the cars are usually front wheeled steered. So it is the inertia of the wheels and the car which causes the rear end of the car not want to turn when turning and they usually slip.
What helps a car go straight?
Power Steering 2nd Answer: True, but automobiles have their turning wheels angled toward the rear of the car, just like the front wheels of a shopping cart. Friction between tires and road work to keep the turning wheels lined up back to front, and it takes a little effort to turn the wheels away from their normal back-front alignment. The effort to turn the wheels is much less if the auto has . . . Power Steering per the above answer!
Why does a clunking sound come from your front wheels when turning?
Defective CV joint or bad wheel bearing.
Clicking noise when turning 2002 Xterra?
all of them do it theres just a bolt on each of the two front wheels that touch when turning all the way
Why is your steering wheel not turning?
Two reason why your steering wheel is not turning.One....your ignition key is removed and you have turned the steering wheel to LOCK position.Two your front wheels are pinned against an obstacle so your front wheels are blocked.
Are the front wheels of a skateboard supposed to be loose for turns?
No, the front wheels of a skateboard should be as tight as the back ones. The reason for this is when your turning the front side of the board may table-clip your wheels causing you to stop short, and the front side may cause you to wobble and lose control,(usually happens when you're racing someone or riding really fast.)
Why do the front wheels grab when turning in a parking space in a 1998 jeep grand Cherokee 4x4 AWD 5.2 V8?
The front axle is not disengaged OR the front u-joints are starting to fail.
Will 22 inch rims fit a 1999 Chrysler Concorde?
The wheel wells are not deepen enough. When turning the front wheels they rub.
How to calculate the turning radius of a vehicle?
To calculate the turning radius of a vehicle, you can use the formula: turning radius wheelbase / tan(steering angle). The wheelbase is the distance between the front and rear axles of the vehicle, and the steering angle is the maximum angle the front wheels can turn. By plugging these values into the formula, you can determine the turning radius of the vehicle.
What would cause grand prix front tire noise when turning?
The noise/squeeling is due to understeer caused by the back wheels pushing too hard oer the front wheels, this can also be attributed to suspention set-up and wing set-up
