0
They don't. Take the size 225/50-16.
P stands for Passenger Vehicle.
Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's "Section Width" (cross section) in millimeters. P225/50R16 The 225 indicates this tire is 225 millimeters across from the widest point of its outer sidewall to the widest point of its inner sidewall when mounted and measured on a specified width wheel. This measurement is also referred to as the tire's section width. Because many people think of measurements in inches, the 225mm can be converted to inches by dividing the section width in millimeters by 25.4 (the number of millimeters per inch). 225mm / 25.4 = 8.86"Typically following the three digits identifying the tire's Section Width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio. P225/50R16 The 50indicates that this tire size's sidewall height (from rim to tread) is 50% of its section width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall; the lower the number, the lower the sidewall. We know that this tire size's section width is 225mm and that its section height is 50% of 225mm. By converting the 225mm to inches (225 / 25.4 = 8.86") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.43". If this tire were a P225/70R16 size, our calculation would confirm that the size would result in a section height of 6.20", approximately a 1.8-inch taller sidewall. The last number is the wheel diameter.
They don't. Take the size 225/50-16.
P stands for Passenger Vehicle.
Following the letter(s) that identify the type of vehicle and/or type of service for which the tire was designed, the three-digit numeric portion identifies the tire's "Section Width" (cross section) in millimeters. P225/50R16 The 225 indicates this tire is 225 millimeters across from the widest point of its outer sidewall to the widest point of its inner sidewall when mounted and measured on a specified width wheel. This measurement is also referred to as the tire's section width. Because many people think of measurements in inches, the 225mm can be converted to inches by dividing the section width in millimeters by 25.4 (the number of millimeters per inch). 225mm / 25.4 = 8.86"Typically following the three digits identifying the tire's Section Width in millimeters is a two-digit number that identifies the tire's profile or aspect ratio. P225/50R16 The 50indicates that this tire size's sidewall height (from rim to tread) is 50% of its section width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall; the lower the number, the lower the sidewall. We know that this tire size's section width is 225mm and that its section height is 50% of 225mm. By converting the 225mm to inches (225 / 25.4 = 8.86") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.43". If this tire were a P225/70R16 size, our calculation would confirm that the size would result in a section height of 6.20", approximately a 1.8-inch taller sidewall. The last number is the wheel diameter.
What else can I help you with?
What are the tire sizes that can be used on a 96 Bonneviile?
Look on the driver's door support and there is a decal with sizes and tire pressures. DO NOT mix tire sizes as it will disrupt the antilock brakes.
What are the common 700c tire sizes used for road bikes and how do they differ from other tire sizes?
Common 700c tire sizes for road bikes are 23mm, 25mm, and 28mm. These sizes are narrower and have higher pressure compared to other tire sizes, providing less rolling resistance and better speed on smooth roads.
Can you mix 185 70 14 and 185 75 14 tire sizes?
No, never mix tire sizes.
What would make a 2004 Mercury Mountaineer pull to the left?
Low tire pressure, tire sizes that do not match, out of alignment, or bent suspension parts.Low tire pressure, tire sizes that do not match, out of alignment, or bent suspension parts.
What information can I find in the rim tire size chart?
A rim tire size chart provides information on the recommended tire sizes that can fit on different rim sizes. This includes details such as tire width, aspect ratio, and diameter that are compatible with specific rim sizes.
Tire sizes Mercury villager?
Your correct tire size is on your door sticker.
What is a 35x12.5x17 tire in the other form of tire sizes?
315/70/17
Can you mix tire sizes?
Generally no for vehicles that were not designed to use differing tire sizes. For vehicles designed to use equal sizes, using different sizes can lead to unsafe handling quirks. This is especially true for using different sizes on the left and right of front or the rear. That is why a limited use spare tire has restrictions on speed, etc.
What is the difference between 700x23 and 700x23c tire sizes?
The difference between 700x23 and 700x23c tire sizes is that the 700x23c tire is slightly wider than the 700x23 tire. The "c" in 700x23c indicates that it is a clincher tire, which is designed to fit on rims with a specific width.
What are optional Tire sizes for 1995 Toyota 4Runner?
anywhere from a 28 inch tire to a 31 inch tire.
What are the tire sizes you can put on a 2002 Chevy silverado?
check w/tire shop
What is the tire size on 1993 Mercury Villager?
Tire sizes are on the door jamb sticker.
