Look at the Electronic Control Module. If it is the module type that looks like a dull aluminum box with 2 or 3 plugs to it, these are problematic; Replace it and keep a spare with you at all times.
Look at the Electronic Control Module. If it is the module type that looks like a dull aluminum box with 2 or 3 plugs to it, these are problematic; Replace it and keep a spare with you at all times.
It is used in extremely cold climates to aid in starting. The block heater keeps the fluids warm for a much faster start.
3-5 min drive safe
Blocked heater core, faulty heater valve, disconnected connection to the heater valve.
This is probably due to the fact that you are out of gasoline, cars can't start without it. :(
The idle speed control valve was bad.
Still Warm was created in 1986-06.
To time a 1984 Ford Bronco II, you need to warm up the engine and then turn it off. Locate the timing indicator on the crankshaft pulley and the timing mark on the engine's timing cover. Use a timing light connected to the number one cylinder's spark plug wire. Start the engine, aim the timing light at the timing marks, and adjust the distributor until the timing mark aligns with the specified degree for your engine, which is typically found in the service manual.
When first start the engine on your ford escape in park, it sputtered and then when warm up it runs ok and then when you driving on the road it jerks going up the hill and lose power. And on flat road it smooth out.
Hard to start when cold?? Warm?? All the above? How many miles on the vehicle? Fuel filter been changed lately? How many miles are on the spark plugs?
I have a 2000 Ford Contour . It attempts to start when it is cold but will not catch . It will start when it is warm. I have had it in and out of the shop for a month. They have replaced many parts andI had it dagnosed but it is still not starting. The diagnosis was fuel pump. That did not help. Temp sensor, Cam also replaced. They don't knopw what to do and are baffled.
they start some where
Keep Each Other Warm was created on 1986-11-17.