converter is probably clogged
The driver was told to accelerate get faster because he was driving to slow.
When You Drive A Old Skool Car With A Carb You press down the pedal for cold starts but when car is warmed up you don't always have to press down the pedal Sometimes you need to press it down in the morning becoause of the condensation. //////on a car with a carburetor you need to press the gas pedal when starting cold to engage the choke and also the fast idle cam
The trucker phrase "hammer down" originated from the use of a hammer to drive truck tires over long distances. Over time, it came to mean to accelerate and drive fast, pushing the gas pedal to the floor to gain speed quickly. It is often used to encourage speed and efficiency in truck driving.
press down firmly on the brake pedal and keep holding down the brake pedal
This is not normal. If your car is doing this, get it checked out.
when your brake pedal moves up and down when you press the pedal ,usually it is a warped brake rotor or a loose bearing on one or both brake rotors Warped front disk brake rotors.
Check either on the steering column down by brake pedal or on side of transmission Check either on the steering column down by brake pedal or on side of transmission Check either on the steering column down by brake pedal or on side of transmission Check either on the steering column down by brake pedal or on side of transmission Check either on the steering column down by brake pedal or on side of transmission
press back down on the pedal
going by experience that is most likely ign or an egr problem
Broken or worn control cable? Bad throttle body?
Is your parking brake on?
Put a chevy LS2 engine in it <<>> Put your foot down further on the accelerator pedal.