0
if its fuel injected and u ran it on empty itll do that or ur floater is screwed up
your fuel sending unit needs replaced or the wiring is fried, probably at the pigtail at the tank. the gas tank has to come out. be sure to manually check the new unit before installing it so you don't have to pull the tank again. just plug it in, move the arm by hand while a buddy watches the gage move
What else can I help you with?
How do you read codes on a 1999 Chevrolet suburban?
How to read check engine codes on a 1999 chev 1500 suburban.
What causes Gas gauge on a 1997 Monte Carlo to always read empty?
no power at the sending unit.
Is the union of disjoint sets is always the empty set?
No, only if both sets are empty. The intersection of disjoint sets is always empty.
How do you add differential fluid to a 98 suburban?
read the manual
Reseting the message center on a 2001 Suburban?
Read your owners manual.
What is the reccommended 1999 GMC Suburban maintenance list?
Read your owners manual.
Why does Gas gauge read empty at full and full at empty?
I would assume that the wires are hooked up backwards
Why does an empty wallet always stay empty?
Because there's never any change in it.
Do sets always have an intersection that is not the empty set?
No, they do not.
Why Chevy Suburban fuel pump burn?
Running the vehicle with a partially clogged fuel filter. Continuously running it with the tank almost empty.
What should the voltmeter in a 1996 GMC suburban read?
13.9 to 14.3 VOLTS with engine running.
Why does Suburban 2500 not transfer gas between tanks and stalls before empty and does not take a full fill up?
Sounds like the transfer pump in the rear tank is bad and you are running out of fuel in the front tank. The fuel gauge reads both tanks and gives you an average between the two. So, if the front tank is empty and the rear tank is full the gauge will read aprox a half tank.
