Is the brake fluid level LOW in the brake master cylinder in the engine compartment ?
Get a new one .
The 1998 Chevy Corvette parking brake can be adjusted with the parking brake adjustment bolt. You can also adjust the parking brake cable.
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
The BRAKE(!) light will go on steady without the parking brake on.
The parking brake is only ONE of the triggers for the dashboard brake warning light.Before referring you to the "Related Questions" below, I'd suggest checking the brake fluid levels.
There is either a leak still evident in the system or air in the system or the E-brake is on slightly.
It could be one of serveral things. - Low brake fluid. - Parking brake is on or slightly on. - If the brake pedal has been pushed all the way to the floor. Check the fluid and parking brake first then go to plan B.
No.
if turn signals are working , and brake lights not working, i would replace the stop light switch on the brake pedal
If you mean the warning light that shows BRAKE and has the exclamation mark underneath it that means either your parking brake is on or the brake fluid level in the brake master cylinder in your engine compartment is low
I am thinking you mean the light that says brake on the dash, check you parking brake handle, if it is not going down all the way it will come on, also there is a switch there to detect the brake handle, this may need adjustment. Secondly, the brake fluid reservoir will trigger this light when the fluid is low.
Probably an issue with the parking brake switch.