Sounds like you may infact still be low on freon get the hose with the guage and it will let you know when it is full . and Remember that if you replace the freon from R12 To R134a the 134a will only be 75% of what the R12 was In LBS. And if it is full check the low pressure switch located on the suction side of system. not knowing what or how large of system you have cannot tell you what it may take to get it up to the 40 to 45 lb range . nor knowing the specs on your low pressure switch. Hope it helps Ron
Double clicking on the printer icon shown on the control panel should show what printers are installed.
If you already have Internet Explorer installed on your computer, than you have Active X control already installed. If you do not have Internet Explorer installed, then download Internet Explorer from Microsoft's website and install it.
Mechanical control system for an compressor?
Things to check first: Turn on the A/C control - open the hood and look at the compressor and observe whether or not the clutch is engaging (clicking on and off). If it isn't then check the fuse/electric relay that control the compressor. If the compressor operates but cycles rapidly (clicks on and off), that could be a sign of low refrigerant, have it checked. If these easy do-it-yourself checks are inconclusive then you need a mechanic.
Compressor not running?Heater control in heat position?
All computer information can be accessed by going to the Control Panel > System and on the General tab. If you're using Windows XP you'll have to click on Performance and Maintenance in the control panel before you find and can click on System.Open System by clicking the Start button , clicking Control Panel, clicking System and Maintenance, and then clicking System.Under System, you can view the processor type and speed, as well as the number of processors installed, if your computer uses multiple processors.
If the AC compressor is engaging it could be the heater control valve is stuck open. If the AC compressor is NOT engaging you probably have a problem with the controls, a sensor or the compressor.
Yes, as long as you have an internet connection. They factory app is already installed and is called "voice search".
You go into programs in the control panel, click uninstall, use the wizard, and then reinstall it as you did when you first installed it.
Click... Start > Control panel > Programs and features. That will list all the programs installed on your computer. You can choose to list them alphabetically (the default setting) or by clicking any of the titles at the top of each column, you cna list them (for example) by date installed - each click sorts by ascending or descending order.
The Start button on a computer gives the user access to all of the programs installed onto that particular computer, and also the control panel, devices, user files, such as pictures and documents, and access to help and support.
The 1994 Oldsmobile air conditioning compressor control relay can be found on the firewall in the engine compartment. The relay will be on the passenger side of the firewall.