0
Fuses That "Blow" Repeatedly
Without being able to "hands on" troubleshoot the circuit served by the repeatedly blowing fuse, none of us can identify the specific defect which is causing your problem.
Therefore, the following generic answer can be applied to any electrical circuit, whether in a vehicle, or in a building, whether direct current [DC], or alternating current [AC].
Fuses [and Circuit Breakers] are safety devices designed and installed in electrical circuits TO PROTECT the conductors [wires] and other components from short circuit conditions and/or overload conditions which cause an extremely large flow of electrical current [measured in Amperes], which causes overheating of the conductors that results in damage to the insulation and the conductors.
And in a worst case scenario, the probability of a FIRE which could destroy the vehicle, house, or other structure in which the circuit is located.
When a fuse or Circuit Breaker [and replacement fuses, or repeatedly "tripping" Circuit Breakers] "blow," especially if it happens repeatedly, is an indication of an UNSAFE CONDITION in that circuit, usually a short.
The fuse or circuit breaker is doing what it was designed, intended, and installed to do; that is to protect the conductors and components of the circuit which it serves.
The proper "fix" for this issue is for a qualified technician, who knows what he or she is doing, to troubleshoot the involved circuit, find and identify the defect, and make proper repair [s], BEFORE replacing the fuse again [with the properly sized fuse or before resetting a circuit breaker].
Some ignorant few people will suggest installing a larger fuse or breaker to solve the problem, BUT that will only increase the hazard, not correct it.
Do not follow "bad" advice by installing a larger fuse in a misguided attempt to correct the problem. To install an oversized fuse would almost guarantee damage to the wiring and the probability of an electrical system fire.
What else can I help you with?
How do you disconnect the alarm on a 99 Sebring also could it be the reason for blowing the linkable fuse for alternator and radiator fan?
The alarm is built into the body computer and can not be removed. If you are blowing fuses, you have an short to ground or a current overload.
Why does my 1999 Chrysler Sebring convertible keep blowing its tail light fuse?
Short in the wiring or the lamp holder for the tail light is corroded.
Why does the 20 amp fuse for the starter-fuel keep blowing on your 2002 sebring convertible?
It is very common for the starter to be the cause of that fuse blowing.
Why does the starter fuse keep blowing on a 2002 Chrysler Sebring?
The starter has failed.
Will 2.7 from 1999 intrepid fit 2002 Sebring 2.7?
Where is the fuse box for a dodge sebring
Why I keep blowing the starter fuse in my 2002 Chrysler Sebring?
A failed starter is a likely cause.
What causes Blown fuses when starting a 2001 chrysler sebring?
A fuse blows when the current in the circuit passes what the fuse is rated at. If you are blowing the ECM/starter fuse, the starter is probably bad.
Where is the alternator fuse on a 1999 mistubishi Montero sport?
There is not one.
Where is the alternator fuse on a 1999 Acura RL?
The alternator fuse on a 1999 Acura RL is located in the under-hood fuse box. To find it, open the hood and locate the fuse box near the battery. Inside the fuse box, the alternator fuse is typically labeled and can be identified in the fuse diagram found on the cover of the fuse box. If you're unsure, consult the vehicle's owner manual for specific details.
Where is the alternator fuse on a 1999 civic si?
in the fuse panel under the dash. its number 15
Which one is the cigarette lighter fuse in the fuse box for 1999 Sebring Lxi?
Number 8, I think its the second 20amp fuse from nearest the driver seat side.
What is alternator fuse a Honda prelude 1999?
In a 1999 Honda Prelude, the alternator fuse is a protective component in the electrical system that helps prevent damage to the alternator and other electrical parts in case of a short circuit or overload. It is typically located in the fuse box under the hood or in the cabin. If the alternator fuse blows, it can result in the alternator not charging the battery properly, leading to electrical issues and potential battery failure. Always refer to the vehicle's owner's manual for the exact fuse specifications and location.
