One of the front blinker bulbs is burnt out. Replace the bad bulb and the blink should function normaly. you have a front right turn signal bulb that is burned out. the resone it blinks fast is there is less load on the flasher .
Usually an airbag light blinks to signal a problem. The number of blinks tells the driver the code number, which informs the driver of the problem.
Check the back signal light. Usually if the front blinks fast the back is out or need to be replace. Vice versa
Change the front turn signal light bulb. It's bad.
It means that a light bulb is out on the side where the light solid (not blinking) it could be in the front or rear of the vehicle.
Does the turn signal also blink? If so, you have two wires touching. What happens when you put the vehicle in reverse and the backup light is supposed to come on? If the turn signal lights up and the backup light doesn't, you have the bulbs in the wrong socket.
get the bulb replaced in the light of the side that's blinks too fast
i got the same problem with my 99 Audi a6.
That means it time for a new blinker light it is burned out.
to differentiate it from a brake light or running lights. Its the only one that BLINKS at a regular rate when looking at it from the back.
Replace bulb Check socket for power & ground Check socket for corrosion
I really need to know how you read a 700... i have never heard of it and cannot find it. if your check engine light shines a long signal that represents a 10, if it is short blinks they represent 1. you take your long blinks and add your short blinks. example two long blinks and three shorts is a code 23.
if you have a "chipped " key, the security system is not recognizing the signal. Have you tried a spare key.?