answersLogoWhite

0

What else can I help you with?

Related Questions

Why will my 2001 dodge ram not go into reverse gear?

Cranckshaft position sensor needs replaced!


1995 dodge neon the speedometer doesnt work you replaced the speed sensor and it still doesnt work whats wrong with it and how do you fix it?

it doesn't work!!


Where is your IAT sensor on your 1990 Geo Tracker?

The 1990 Geo Tracker IAT sensor is located on the top of the transmission. The IAT sensor will be near the back of the transmission.


How do you troubleshoot the car dying in reverse and at stops?

Have a 1990 Ford Tempo GL, The car dies when you put it into reverse or you come to a stop. have replaced plugs, wires, Idol sensor, and cleaned the injectors. Its still doing it. Have a 1990 Ford Tempo GL, The car dies when you put it into reverse or you come to a stop. have replaced plugs, wires, Idol sensor, and cleaned the injectors. Its still doing it.


Where is the iat sensor on a 92 tracker?

The IAT Sensor on a 1992 Geo Tracker is the Intake Air Temperature Sensor. Replacing the air filter might fix this problem.


Where is the speed sensor located in a 1996 Geo Tracker?

The speed sensor for a 1996 Geo Tracker is located on the transmission housing. The speed sensor is important , it keeps track of the tires and delivers the figures to the main system


How do you get your 1994 Volvo 960 shift to unlock and the engine to start?

There is a gear positioning sensor on the transmission. Some go bad and need to be replaced. When they go bad they signal that the transmission is in drive or reverse when you are in park and does not allow you to start the car. Try starting in neutral, if that doesnt work then you will need to replace this part.


Where is the crank sensor on a 1996 Geo Tracker?

there isn't one


How do you install camshaft sensor 2000 Chevy Tracker?

It's bolted to the back of the cylinder head (right side when facing engine) inside a casing....it has an electrical connector on it and it's attached to this casing by one bolt. Unplug the electrical connector, unbolt the sensor and replace in reverse...


Do you have to take the transmission or motor out to put a crank senor in a 2.0 Chevy tracker?

i have a 2001 Chevy tracker and i just replaced the crank sensor. i have been having a problem with mine not cranking. i would drive it and cut it off. it would not crank up until after it sat for a while. the crank sensor has not fixed the problem though. you have to take the tranmission out and take the flywheel off. the sensor is behind it. hopes this helps. i got a sensor at napa for about $100. advance auto parts wanted about $174 for it i think


Camshaft sensor seal Chevrolet tracker?

Not sure what the question is. What, Where etc...


Where is the coolant temperature sensor on a 1992 Geo Tracker?

on the hrottle body