Dex-cool coolant highly corrosive is eating away at gaskets mainly intake manifold gasket.
where do you put freon in on a 2000 gmc jimmy
What type of oil for a 2000 GMC Jimmy
Passenger side floor? Could be leaking heater core
Low coolant? Heater control cable not adjusted properly? Bad thermostat? Heater core "airbound"? Water pump not circulating coolant?
On a 2000 GMC Jimmy, the coolant temperature sensor is typically located on the engine block, near the thermostat housing. It is often positioned on the intake manifold, towards the front of the engine, making it accessible for replacement or inspection. This sensor plays a crucial role in monitoring the engine's temperature and relaying that information to the engine control unit.
Originally it would have had "DexCool" and it should be flushed and changed every 5 years or 100K miles.
Yes, a 2000 GMC Jimmy hood is compatible to a 2000 Chevy Blazer. This is only on the S10 Blazer though.
The coolant level sensor is bad
In a 2000 GMC Jimmy, the coolant temperature should typically range between 195°F to 220°F (90°C to 104°C) when the engine is operating under normal conditions. If the coolant temperature exceeds 240°F (115°C), it may indicate overheating, which can lead to engine damage. Always refer to the owner's manual for specific guidelines and monitor the temperature gauge to ensure safe operating conditions.
about 4,200 pounds
automatic
my 1998 gmc jimmy has no floor heat but i have defrost and ven heat