Remove the key from the ignition before locking. It is to prevent the keys from being locked in the car.
I think you have to push the 'unlock' button twice in order to unlock the doors.
It should lock and unlock with the power door locks. If it is stuck in the locked position, there is a lever in the trunk on the driver's side behind the carpet that will unlock it.
you hit the unlock door button twice.
To program a remote keyless entry on 1996 Chevrolet pickup, first hold down the power unlock button of the door panel. Second, turn ignition key ON, OFF, ON, OFF. Then release power unlock button on the door panel.
Press the unlock button on the key.
To program the keyless entry remote on a Chevy Malibu, close all doors and put the key in the ignition. Hold down the power unlock button on the door while turning your key to on and off twice. Then release the power unlock button on the door.
To unlock the rear door ???just push the unlock button on the drivers side door on the in side and it will unlock all doors and the rear door also. then Just pill on the outside rear door handle and it will open., push the button 2 times to unlock all doors.
Hit the unlock button two times quickly. This will unlock the driver's door and then the passenger door. Sometimes I need to hit the button three times.
Wedge open drivers door, insert rod push unlock button
Remove a battery cable for about 5 min. While waiting to install it open the drivers door. Install cable without shuting the door lock it with the lock button on the door panel(power door lock button), now shut the door and unlock it with the key.. This should work it did for me
Put the key in the door and unlock it.
The driver door does not unlock the power locks for a few reasons. This motor could be burned out or the wires could not be attached correctly.