0
Some of the things you can check; check that the connector is tight at the brake pressure switch located in back of master cylinder on expedition's. Also make sure the accelerator linkage is mounted properly at throttle body and works ok when throttle is open. Check that you have no voltage at the servo motor. with brake light switch depressed, check for voltage. When you step on the brake, a voltage single is sent to the servo motor deactivating motor. Check the speed sensor at the transmission is operating correctly. Remove the connector at the sensor voltage with key on , should be 5 volts. if not check harness connection and spin sensor gear by b hand ,you should get o to 0.5 volts.
What else can I help you with?
What is the amber circle with an explanation point inside mean in a 2006 ford expedition?
It means that the cruise control is activated. Kenneth
What would cause the cruise control to stop working on a 1997 Ford Expedition?
Did you get the a RECALL notice ? Regarding the cruise control ... Ford put out a RECALL on the cruise control last year... I just had mines done on my 98 Ford Expedition XLT last week.
Where is cruise control deactivation switch located on 2003 ford expedition?
Located in the brake pedal assembly
How do you remove the cruise control switch from the steering wheel on a 2006 ford expedition?
To remove the cruise control switch from the steering wheel of a 2006 Ford Expedition, first disconnect the negative battery cable to avoid any electrical issues. Then, use a steering wheel puller to safely remove the steering wheel, ensuring you follow the proper steps to avoid damaging the airbag. Once the steering wheel is off, locate the cruise control switch connections, detach them, and unscrew the switch from its mounting. Reassemble the components in reverse order, ensuring everything is securely fastened.
How do you remove the cruise control switch from the streering wheel on a 2006 ford expedition?
To remove the cruise control switch from the steering wheel of a 2006 Ford Expedition, first, disconnect the negative battery cable to ensure safety. Then, remove the airbag by unscrewing the screws located on the back of the steering wheel, carefully detach the airbag connector, and set the airbag aside. Next, unscrew the steering wheel cover and locate the cruise control switch; disconnect its electrical connector and remove the switch by unscrewing it from its housing. Finally, reverse the steps to install the new switch.
How do you disconnect cruise control on 2001 ford expedition?
you can pull the two wire connector on the front of the master cylinder. this will dsable the cruise control. there is also a recall (fire hazard) on that connector as well.
How many valves does the 2006 Ford Expedition have?
The 2006 Ford Expedition has 24 valves.
What size engine does the 2006 Ford Expedition have?
The 2006 Ford Expedition has a V8 engine.
Is the 2006 Ford Expedition electric or gas?
The 2006 Ford Expedition is a gas-powered vehicle.
What kind of transmission does the 2006 Ford Expedition have?
The 2006 Ford Expedition has a 4-speed automatic.
How long is the 2006 Ford Expedition?
The 2006 Ford Expedition is 17 ft. 1.8 in. (205.8 in.) long.
What is the turning circle of the 2006 Ford Expedition?
The 2006 Ford Expedition's turning circle is 39.2 ft..
