It may be stuck and a little crooked in the track. Best thing to do is take the bolts that hold the seat to the floor loose and then use button to push it backwards. I would also recommend using some silicone lubricant like liquid wrench (available at most auto parts houses) and spraying in the track. WD-40 works ok as well, but youd get more longevity out of the liquid wrench.
It wasn't a standard feature but if you have one it's on the floor to the front left of the drivers seat.
To replace the power seat switch on a 1995 LeBaron convertible, first disconnect the car battery to ensure safety. Remove the seat cushion by unscrewing any bolts securing it to the floor, then tilt or lift the seat to access the switch. Disconnect the wiring harness from the old switch and remove it from the seat. Install the new switch by connecting the wiring harness and securing it in place, then reattach the seat cushion and reconnect the battery.
Check the fuse.
driver seat and power mirrors is not working...what to check for??
Ours is under the drivers seat. You pull on a lever and the whole seat tips backwards. Hope this helps. There are two red levers under drivers seat which you pull together, which makes the seat tip revealing box where battery is kept. you also unscrew seat adjustment lever for access of battery. this is quite an easy job to do.
I had a problem with mine and it wouldn't go forward. If it moves backwards, it needs to go all the way back before it operates correctly.
You Don't.
there should be 4 bolts that hold the seat to the floor. just remove them and if it has power seat dont forget to unplug them.
drivers seat does not go back?
behing the rear seat
It is behind the rear seat.
Use a 10mm socket.