Check to see if you are getting power to the motor - if so bad motor
Check to see if anything restricting movement
Check to see if cables are connected at motor
locks out rear door window switches
In the power distribution box ( which is " live " ) located in the engine compartment on the drivers side : In the 2nd row from the drivers side and the 3rd fuse from the firewall end is a ( 30 amp maxi-fuse for the power windows , locks , and seats )
The 2000 Ford Explorer Eddie Bauer edition is known for several electrical issues, including problems with the ignition switch, which can lead to difficulty starting the vehicle. Additionally, issues with the power windows and door locks are common, often due to faulty switches or wiring harnesses. Other reported problems include malfunctioning dashboard gauges and issues with the anti-lock brake system. Regular maintenance and timely inspections can help mitigate some of these electrical concerns.
remove the door panels and the lock should have a clip that holds it in pull that it actually should slide towards the front of the car and the clips on the rods need to poped aff
On a 1997 Ford Explorer : The ( # 10 maxi fuse ) is a light green color 30 amp fuse for the power windows , door locks , and seats ( 2nd row from driver side , 3rd maxi fuse from firewall end )
Maxi fuse # 10 - 30 amp is for power windows , power locks and power seats
Bad relay, most likely.
Under the hood, #10, a 30A Maxi fuse, controls power seats and windows too.
Automatic door locks engage on the 2003 Ford Explorer for safety.
To recline the Eddie Bauer single stroller, locate the recline adjustment straps or lever, usually found on the back of the seat. Pull the straps or press the lever while gently pushing the seat back to your desired recline position. Ensure that the seat locks securely in place before placing your child in the stroller. Always refer to the specific model’s manual for detailed instructions.
In the power distribution box in your engine compartment of your 1997 Ford Explorer there is a 30 amp maxi-fuse in location # 10 , for your power seat(s) , power windows and power locks . Ford recommends disconnecting the battery before servicing anything in the PD BOX , which would mean that your Explorer would have to relearn its idle , the clock would need to be reset etc.
Check the drivers side switch panel for the switch that locks out the passenger windows from working, make sure it is not on.