answersLogoWhite

0

I am just going to tell you how the switch works to put your car in four wheel drive. If you push the upper part of the switch once at any time, moving or not, the light should come on indicating you are in four wheel drive high range, to put it in low range you have to be stopped in neautral not park then push the lower part of the switch and you will be in low range four wheel drive. To get back to two wheel drive or high fourwheel drive you have to stop and be in neutral and push the upper part of your switch, you will then be back in high four wheel drive, then you can push the button again to get it into two wheel drive at any time, you don't have to be stopped.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Where can you get replacement buttons for escada sport jean jacket?

Ii need a button for my escada blazer!


How many buttons does a double breasted blazer have?

hi... in double breasted blazer there two most common button constructions are 6×2 and 4×2.


What is the plural of button?

Buttons is the plural of button


What is d pad on a ps3 remote?

The down button and sometimes the group of the 4 buttons with arrows


How do you set the clock in a '92 Chevy S10 Blazer?

push the set button then within 10 seconds push the seek and scan buttons to change the time.


Can you engage your 4x4 by not using the electronic push button?

No. The buttons operate the shift motor on the transfer case. The only way would be to swap in a manual transfer case.


Your 1988 bronco will not disengage out of 4x4 when you push the button?

If you are in 4LO, you will need to shift into neutral to go into 4HI and then you may press the 4x4 button to go back to 2WD. If you try this and the buttons are simply not working, it could either be the push-button system (sometimes they freeze up in cold weather) or the transfer case itself (try checking the fluid).


Which buttons are a b and c on tamagotchi v3?

Well the buttons on the Tamagotchi system are in order. (far left) A (middle) B (far right) C


How do you declare an array of buttons in Java?

To declare an array of buttons in Java, you would use the following syntax: Button[] buttonArray = new Button[n]; where n is the number of buttons you want in the array. This creates an array of n buttons, where each element can hold a reference to a Button object.


Can a 2002 Chevy s10 blazer be flat towed?

With a manual transmission, manual transfer case, or four button electronic transfer case (which has a neutral position), yes. Otherwise, you would have to disconnect the driveshafts.


How do I get my 1994 Chevy blazer's 4whl dr button to function?

If the button is not working, might be a vacuum line problem. Vacuum lines engage the 4x4, might need to check the lines to the 4x4 transfer case.


What is a button machine?

a button machine is a machine that makes buttons.