0
The rings could be bad and may needto be replaced. Try getting a compression test to see if they are bad or not. The reason it would run better warm is because the piston and rings expand when warm and this would cause a better seal between the cylinder and the cylinder wall. The rings could be bad and may needto be replaced. Try getting a compression test to see if they are bad or not. The reason it would run better warm is because the piston and rings expand when warm and this would cause a better seal between the cylinder and the cylinder wall. The rings could be bad and may needto be replaced. Try getting a compression test to see if they are bad or not. The reason it would run better warm is because the piston and rings expand when warm and this would cause a better seal between the cylinder and the cylinder wall. The rings could be bad and may needto be replaced. Try getting a compression test to see if they are bad or not. The reason it would run better warm is because the piston and rings expand when warm and this would cause a better seal between the cylinder and the cylinder wall.
What else can I help you with?
Where is the fuse for heated seats on a 2003 Chevy Silverado?
where is the fuse for heated driver seat on 2003 Chevy Silverado>
Where is heated oxygen sensor bank 1 sensor 2?
I have a 2004 Silverado 4.3l engine, my questions is are all 4 02 sensors the same are they interchangeable
What would cause your air fileter to burn?
The air filter collects dust in the course of filtering the air. As it gets heated up due to the engine heat or the heat in the engine area or under the hood the dust in the air filter also gets heated up and develops into fire. Most of the air filters are made of combustible material.
How can you add heated mirors to your 2000 Silverado?
Buy oem or aftermarket heated mirror and wire them to your rear defrost or create a fused circuit for the mirrors. My 2000 Chevy Silverado LT Ext Cab 4 dr 5.3L 4x4 Z71 has stock heated mirrors.
1999 silverado overheating coolant in oil is this most likely blown head gasket or cracked head?
Neither 1, It is a common problem with that engine for the intake gasket to leak engine coolant into the engine lifter gallery / into engine oil. Replace intake manifold gasket and change oil and FILTER a couple of times. A head gasket or cracked head will not allow engine coolant to get into the oil. If you got or over HEATED the engine like real hot then you may have blown are cracked a head but I doute it. Not common, Replace intake gasket and you'll see that the engine will be okay more then likely.
How do you replace the heated side mirror ONLY on a 2003 Chevy Silverado Truck?
Remove the inside door panel from your 2003 Chevy Silverado pickup truck. Remove the wiring harness from your heated side mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.
Does osmosis create temperature difference?
No, not unless the screen or filter is heated
What kind of engine uses heated water for power?
It is a steam engine.
Is the PCV valve heated or non heated for a 2005 for Taurus with a 3.0 v6 vulcan engine?
On a 2005 Ford Taurus with the 3.0 liter Vulcan , V6 engine : The PCV valve is heated ( in the power distribution box , which is " live " , located at the front of the engine compartment near the battery , mini fuse # 22 is a 5 amp fuse for the heated PCV valve on the Vulcan engine )
What is Chevy Silverado LT package?
The Chevy Silverado LT package includes numerous options that are standard. It comes with power locks, keyless entry, front lumbar support, heated mirrors, and an external temperature display.
What is the procedure to change the Allison LCT 1000 Internal filter?
According to the service manual, it says to check the fluid with the engine idling in Park. There is a cold engine range of marks and a hot engine range of marks on the dipstick. The upper set of marks are for the hot engine level range and the lower for cold check. The fluid expands when it is heated.
Car over heated and shut itself off due to a bad water pump so you replaced it you adjusted timing replaced spark plugs now it will turn over but not start why?
Do a compression test. If you have no or low compression the piston rings may have been damaged. If that is the case the engine will require rebuilding.
