I had the same problem with this and with mine I found out the curcuit board on the back of the taillight needed to be replaced. If you have a late model get it checked out.
Signal relay 2002 dodge intreped
I would like to remove the fuse for my turn signal lights in my 2002 mercr mountieer. Where is the chart located? I misplaced the manual. Thanks, 2002redtruck
It's the turn signal indicator-located behind the hazard lights.You have to take it out and replace it.
Check the fuses and if they are good then check the brake light switch.
No brake lights but turn signals work? Turn signal switch brakes route through it.
You may have a bulb that that brunt a element which than crossed the other element cause all lights to come on a one time. I have seen this before. If this does not light all bulbs when the brakes are applied, then I would be looking in the front lights, if it does I would look in the back lights.
some times the tail lights won,t work
One or more of the tail lights, head lights, or brake lights is out.
You Will Have To Take To A Dealer. Best Of Luck
Yes, or a bad brake switch, a wiring problem, or bad bulbs.
you can't. the mileage signal is integral to the transmission shifting
bulb is burnt