0
the reasons I can think of right off are, a bad mechanical fuel pump( in which the diaphragm is leaking and gas is running into the oil) or an engine that had flooded during start, or leaking rings which is letting gas run by the pistons into the oil. (last case engine is pretty much worn out)
What else can I help you with?
What would the world be like without gas or oil?
The world would be dark, hungry, dirty and desperate without oil and gas
Is it harmful to store motor oil into a empty gas can then putting oil into motor?
As long as the gas can was clean, then that would be ok.As long as the gas can was clean, then that would be ok.
Which is better oil or gas heat?
Gas is cleaner plus you don't have to have an oil tank with gas. On the other hand you would have less of a chance of an explosion with oil. So over all I would go with a heat pump.
What does 50 to 1 mean when mixing oil and gas?
50 parts gas to 1 part oil. So the amount of oil would be 1/50th the amount of gas.
What would the gas oil mixture be for 1974 mercury 7.5 HP outboard motor?
What would the gas oil mixture be for 1974mercury 7.5 HP outboardmotor?
A gallon of gas what is the ratio 50 to 1 oil to gas mix?
To create a 50 to 1 oil to gas mix, you would need to use 50 parts gasoline to 1 part oil. For every gallon of gas (128 ounces), you would divide that by 50, which equals approximately 2.56 ounces of oil. Therefore, for one gallon of gas, you would mix in about 2.56 ounces of oil to achieve the desired ratio.
Where in California can a good oil and gas job be found?
California has a lot of oil and gas, but the easiest way to get a job related to gas and oil would be working at a gas station. The money should be more interesting if you get a job with the companies who the oil comes from.
6 gallons of gas what is the ratio 50 to 1 oil to gas mix?
To achieve a 50:1 oil to gas mix with 6 gallons of gas, you need to calculate the amount of oil required. For every 50 parts of gas, there is 1 part of oil, so for 6 gallons of gas, you would divide 6 by 50. This equals 0.12 gallons of oil, or approximately 1.5 cups. Thus, you would mix 6 gallons of gas with about 0.12 gallons (or 1.5 cups) of oil.
What is the common occupation in South America?
URUGUAY Oil and Gas Jobs ARGENTINA Oil and Gas Jobs ECUADOR Oil and Gas Jobs CHILE Oil and Gas Jobs BRAZIL Oil and Gas Jobs PARAGUAY Oil and Gas Jobs PERU Oil and Gas Jobs FALKLAND ISLANDS (MALVINAS) Oil and Gas Jobs COLOMBIA Oil and Gas Jobs SOUTH GEORGIA Oil and Gas Jobs PANAMA Oil and Gas Jobs BELIZE Oil and Gas Jobs BOLIVIA Oil and Gas Jobs COSTA RICA Oil and Gas Jobs EL SALVADOR Oil and Gas Jobs FRENCH GUIANA Oil and Gas Jobs GUADELOUPE Oil and Gas Jobs GUATEMALA Oil and Gas Jobs GUYANA Oil and Gas Jobs HONDURAS Oil and Gas Jobs JAMAICA Oil and Gas Jobs NETHERLANDS ANTILLES Oil and Gas Jobs NICARAGUA Oil and Gas Jobs PUERTO RICO Oil and Gas Jobs SURINAME Oil and Gas Jobs VENEZUELA Oil and Gas Jobs VIRGIN ISLANDS (BRITISH) Oil and Gas Jobs VIRGIN ISLANDS (U.S.) Oil and Gas Jobs
Why would a 1993 Mazda 626 smell like burning oil or gas?
it leaks oil.
Is the oil spill the kind of oil that you can use for gas?
yes but it would have to be purified before using it.
How much oil do you add to 500ml gas to get a ratio of 30 to1?
To achieve a 30:1 fuel-to-oil ratio, you need to determine how much oil to add to 500 ml of gas. For a 30:1 ratio, you would divide the amount of gas by 30. Therefore, you would add approximately 16.67 ml of oil to 500 ml of gas.
