0
What else can I help you with?
Where do you add brake fluid on an 1990 Oldsmobile cutlass supreme?
The master cylinder contains the reservoir for the brake fluid. This is where you would add it on an 1990 Cutlass Supreme.
Why would ones driver side rear brake lock up on a 1996 Cutlass Supreme?
Replace wheel cylinders and check rear proportioning valves.
Brake lights out on 95 Olds Cutlass Supreme. Turn signals work and fuse is good. Brake switch checks out good also. Any thoughts on where I am loosing power?
its in the steering colume replace the turn signal switch
What size torx for a cutlass supreme brake job?
what size torx for a 96 ford bronco?
Where is the brake light switch located on a 1980 Oldsmobile Cutlass Supreme 2Dr?
It's on top of the brake pedal under the dash.
What does brake idiot light on mean1997 Cutlass Supreme?
It could be the brake fluid reservoir is low and is telling you that the brakes need attention.
Location of Component Center in a 1993 cutlass supreme?
Above the brake petal. You have to take the cover off.
Where is brake switch on 96 olds cutlass supreme?
It's a white plastic thing right above the brake pedal. It has two wires that plug into it.
Where do you find the fuse box for an 1985 cutlass supreme brougham?
Bottom left side of emergency brake
What is it when the brake lights on a 1994 Oldsmobile cutlass supreme don't work?
One of two things. Either the brake light switch behind the brake pedal. Or try wiggling or rotating your turn signal stalk in a circle motion. If the brake lights work when the turn signal stalk is wiggled then you need to replace the turn signal stalk.
How do you release parking brake on 1997 olds cutlass supreme if emergency brake cable is broke?
If the cable is broken and parking/emergency brake is still ON, then they are rusted in place ! - Your emergency brake system needs urgent work.
What size are the rear brake lines 1995 cutlass supreme?
The rear brake lines for a 1995 Cutlass Supreme typically have a diameter of 3/16 inch. When replacing or inspecting brake lines, it's important to ensure that you use lines that meet or exceed the original specifications for safety and performance. Always verify the specific requirements for your vehicle model, as variations may exist based on the vehicle's configuration.
