Could be many things, bad plug wire or wires, bad power pack or packs, plugs, clogged fuel filter, bad gas, vacuum leak or leaks.
An engine from a LIncoln would not be a direct fit into a Dodge. That would take a lot of modifications.
My advice would be to set the points at .020" with a feeler gage to get the engine running, and then use a dwell meter to set the dwell after the engine is running.
Engine running
no, they made many changes to the engine in 03. It wouldnt match up with the computer and you would have problems
Nothing provided the engine is not started up. With no oil, a running engine would eventually seize up.
Becaue if it didn't idle, then it would not be running.
On a 2003 Lincoln LS or Lincoln Town Car : Bank 2 is the drivers side of the engine Sensor 1 would be close to the engine BEFORE the exhaust enters the catalytic converter
If the check engine light is flashing with the engine running , that means a spark plug misfire has been detected
As long as the engine is running, the fuel pump is running.
To calculate the shuttering area of a cylinder, you need to find the surface area of the cylindrical sections that require shuttering. The formula for the lateral surface area of a cylinder is (2\pi rh), where (r) is the radius and (h) is the height. If the top and bottom surfaces also need to be shuttered, you would add the area of the two circular bases, calculated as (2\pi r^2). Thus, the total shuttering area is (2\pi rh + 2\pi r^2).
Abraham Lincoln expressed his reluctance about running for president and emphasized his belief in the importance of serving the nation rather than seeking power for its own sake. He famously remarked that he would not actively campaign for the presidency, stating that he would let the people decide if they wanted him to lead. Lincoln believed that if elected, it would be a call to duty rather than a pursuit of ambition.
On a Lincoln Navigator : Bank 2 is the drivers side of the engine * sensor 1 would be close to the engine BEFORE the exhaust enters the catalytic converter