Should be o.k. as long as it is a 318 truck. 360 is balanced different.Check the rear of intake manifold for an egr valve,some models,years do or do not have an egr valve.simple manifold swap will fix this.exhaust should be fine.watch out for grand Cherokee 318, it has starter on other side of the block!
Yes you can it is the same engine. Just be sure to use the truck exhaust manifolds.
The crankshaft sensor is located in the engine on a Chevy 1500 truck. This is under the hood.
Normally the timing chain will last the life of the engine and is replaced during a complete engine overhaul.
The engine block and heads are the same. The intake and exhaust manifolds are different. The transmissions do not interchange due to different control systems.
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
They could.
It is a 4L60E
You take off the bolt at rear of oil pan and drain it. Then replace bolt and change oil filter on side of engine, then fill engine with required amount of new oil.
Turn the ignition on, engine off. Press the gas pedal to the floor three times.
Driver side of the engine.
Only depends on the engines. If they're the same engine then ya they'll bolt right up.
what is the ign firing order for a 1994 dodge ram 1500 truck with a 360 engine in it