Not on a stock vehicle. With modifications to the suspension they will fit.
The stock ground clearance for a 1973 Chevy Nova is typically around 5 to 6 inches, depending on the specific model and suspension setup. This measurement can vary slightly based on factors such as tire size and any modifications made to the vehicle over the years. Always check the vehicle's specifications for the most accurate information.
235/65/R16
There is a sticker on the drivers side door that will tell you.
it is suggested that 285 75 16 is the largest without adding a lift or suspension modifications.
The 31x10.5x15 tires may fit a stock 1996 Chevy Blazer, but there are several factors to consider. While the Blazer can accommodate larger tires, it may require minor modifications to avoid rubbing, especially during turns or when the suspension compresses. Additionally, it's essential to check the wheel offset and ensure that the tires do not exceed the vehicle's recommended specifications. It's advisable to consult with a tire professional for the best fitment options.
if its a 16 in wheel and 1988-1998 then biggest is a 285/75 R16
Stock for stock... no. Even if the engines matched up as far as horsepower, the technology on the 2010 is just too great. Suspension, rear end, etc.
I got a 2003 Chevy silverado 4x4 z71 stock suspension , and i install on it 285/75r16 tires, that's the biggest tire that you can use, i put that tire size to in a 2002 Chevy silverado work truck 4x2, with no problems. You can trust, good luck.
22s will fit on the hhr on stock suspension.but if you have a lowered suspension they might rubb!i have 20s on my hhr,with lowering springs.
as a 4x4 driver and offroad dude i would say no if its just stock axles and suspension. Which would require extended brake lines. Good Luck
The largest tires that can typically fit on a stock 1979 C10 Chevy Pickup without modifications are around 31 inches in diameter, often 31x10.5R15 or 31x11.5R15, depending on the wheel width and backspacing. However, fitting larger tires may require minor adjustments, such as trimming the fenders or adjusting the suspension. It's crucial to consider the vehicle's overall stance and ensure that there is no rubbing during turns or under compression. Always consult with a tire specialist for the best fitment options.