0
What else can I help you with?
Can you put 1994 350 heads and intake and throttle body on a 1998 vortec 350 block?
LT1 gen 2 to LS1 gen 3 no
Can a rebuilt 350 engine from a 1990 Chevy Sierra be put into a 1998 Chevrolet Silverado which has a blown up 350 vortec engine?
The cylinder heads are diffrent. Intake from 1998 truck will not bolt up to 1990 heads.
Will a 2002 4.3 vortec from a blazer work in a 1998 Chevy S-10 blazer?
Yes they are the same block and heads you might have to swap intakes though
What is the difference in 1994 5.7 350 and 1998 vortec 350 heads?
The bolt holes that are in the head were the intake manifold bolts go are in a different angle and place. won't work.
Will a 1998 vortec 305 motors' intake manifold fit a 1997 350 vortec motor?
Yes they are the same.
Will roller lifters in a 1998 vortec 350 work in a 1986 350 block?
NO. The 86 is not a roller block.
1998 Chevy Silverado coolant in engine?
If you are sure that it did not freeze and crack the block, Then the intake manifold gasket is leaking. That is a common problem with the vortec Chevy engines. You need to replace the gasket with a factory Chevy gasket from the dealer.
Where is the fuel pressure regulator on a 1998 GMC Sierra 1500?
it is under the upper intake manifold, if you have a vortec engine
Where is the fuel pressure regulator on a 1998 Chevy pickup 4.3L Vortec engine?
Under the upper intake assembly
You have a 1998 Chevy pu with a 350 vortec engine vin code R you also have a 1994 Chevy pu with a 350 tbi vin code K The question is are the blocks and crankshafts interchangeable with each other?
Yes they are Vortech is the heads and the intake the rest is the same
Where are the core plugs in a 1998 Chevrolet Malibu 3.1L?
They are located in the engine block and in the heads.
How do you replace the heads on 1998 S10?
I replace the heads with first starting by draining the coolant then removing the exhaust as neccasary then the intake manifold and distributor then the valve rocker arms and pushrods then unbolting the heads.
