yes and no...
all aspire suspension parts front and rear will bolt directly to the festiva body... however the parts are not the same so you have to change the entire structure over to aspire suspension.. the 2 cars share a few individual parts like axle beam and various nuts and bolt.
the aspire and festiva also have different wheel lug patterns so you need to have aspire wheels also and spare.... so if you change only the front or only the rear you will need to carry 2 spares.
no, two different suspension system specifications.
No, the rear shocks and struts from a 1987-1993 Ford Festiva will not fit a 1996 Ford Aspire. While both vehicles share some similarities as they were produced by the same manufacturer, their suspension components are different in design and specifications. It's best to use parts specifically designed for the Aspire to ensure proper fit and performance.
yes
No, they are different sizes, specs, and part numbers.
Yes, but removing the rear spindle is a lot of work and may require power tools or a press. A better alternative and a common modification for a Festiva is to swap the front hubs and rear end from an Aspire to a Festiva. This allows you much larger brakes, removable disc brakes up front, a rear torsion bar for much better handling. Some would say the swap is almost required as the Festiva stock brakes and suspension is horrible.
Ford did not make a festiva for sale in the us in 1997. They made and sold an Aspire auto trans or straight drive
The spindle from an Aspire may not be directly compatible with a 1992 Ford Festiva, as the two models, while related, have different designs and specifications. It's important to check the part numbers and dimensions to determine compatibility. Additionally, modifications may be required for proper fitment. For the best results, consult a mechanic or parts specialist familiar with both vehicles.
I found wiring diagrams for the Festiva/Aspire at http://www.autozone.com/az/cds/en_us/0900823d/80/22/2c/81/0900823d80222c81/repairInfoPages.htm
One way might be to replace the Stabilizer Bars with ones from an Aspire. There are articles on the internet describing how to do it.
Ford Aspire control arms are the same from 1994 to 1997. The left part number is F4BZ-3079A, the right is F4BZ-3078A.
One can purchase Ford Aspire Spider gears directly through the Ford dealership. These parts can also be purchased at auto part stores.
Ford Festiva was created in 1986.