It could be the ignition switch. The ignition switch (for a 1986 323, at least) has two "On" terminals, one of which controls most things, and the second for the wiper motor, blower motor and AC, and the radiator fan. For some reason (wear, a bad spring, or something), the switch stops making reliable contact with the second terminal. Try wiggling the key and see if wipers come on.
Check Fuses? Check Fuses? Check Fuses? Check Fuses?
No sorry they are completely different.
Mazda 323 familia valve timing set up
how do remove the brake drum on a 1991 mazda 323
114x4 thats what i was told on my mazda 323 '84
The speaker size for a 1992 Mazda 323 would be 6-1/2.
yes it will fit but only parts from the 87 ot 89 Mazda 323 will work or u can get it from an 87 to 89 mercury tracer both car are interchangeable
The Mazda 323 of that time from had a 1600cc engine but that isn't going to effect the issue of where to get a wiring diagram. Haynes makes a manual for the 1990-1994 Mazda 323. If you have a 1986-1989 Mazda 323, you will need to get a FSM (Factory Service Manual).
i need carburetors Mazda 323 1.5L rebuilding Harold E. Lozano P. harenlo@cable.net.co
The recommended brand coolant for use in a Mazda 323 Astina is Genuine Mazda Long Life Coolant. This can be bought at any Mazda dealership.
It should work as the Tracer is just a rebadged Mazda 323. A close look at them should let you know, especially if the wiring is the same.
SAE 10W30
4stud vs 4 stud, yes it will, 4 stud vs 5 studd, it will not. for all the 4 stud Mazda 323(f) from by 88 up to 2001 will fit