With the cover off the plug and looking from the back at the screws the "Live" wire [generally red or brown] goes to the Left - and the "Neutral" wire [generally green] gos to the Right.
Another way of putting this would be to say that the red wire must be connected to the prong that goes into the Left hole in the plug outlet in the wall.
It is good practice to coil the earth wire in the plug so that, should the lead by tugged hard, it will be the LAST wire to become disconnected from the screws in the plug.
AnswerCorrection .... sorry!!With the cover off the plug and looking from the back at the screws the "Live" wire [generally red or brown] goes to the Left - and the "Neutral" wire [generally BLUE] goes to the Right. The Earth [genarally green] goes to the centre prong - assuming it is a 3-pin plug.
spark plug wire setup spark plug wire setup
What is the firing order for a 2.5L 4 cyl. engine in a 1985 Jeep Wagoneer?
Forgot to remove one at a time and now do not know if it is done right ....... which wire goes where...waitingfor the spark plug diagram
Tachometer Filter Tach Wire Plug Connector ON A 1979 TRANS AM
The correct wiring diagram for a 3 prong generator plug involves connecting the green wire to the grounding terminal, the white wire to the neutral terminal, and the black or red wire to the hot terminal. Make sure to follow the manufacturer's instructions and consult a professional if needed.
AnswerYou don't need a wiring diagram...all you need is an adapter from the car stereo plug that will wire to your unit that you purchase. You can buy them at most any wal-mart, radio shack. The plug will fit in the car's plug , all you would have to do is wire the other end to your stereo using the unit's enclosed diagram. The adapter plug has what each wire is - left front, left rear, right rear, etc.www.the12volt.com has free wiring diagrams.
The 3-prong dryer plug wiring diagram involves connecting the green wire to the ground screw, the white wire to the center terminal, and the black wire to either of the outer terminals. Make sure to follow safety precautions and consult a professional if needed.
The wiring diagram for a 30 amp 4-prong twist-lock plug typically includes connecting the green wire to the ground terminal, the white wire to the neutral terminal, the black wire to one of the hot terminals, and the red wire to the other hot terminal. Make sure to follow the specific instructions provided with the plug to ensure proper installation.
firing order is 18436572
The correct wiring diagram for a 4 prong generator plug includes connecting the black and red wires to the hot terminals, the white wire to the neutral terminal, and the green wire to the ground terminal. Make sure to follow the manufacturer's instructions and consult a professional if needed.
if you have a 2.4l dohv 4cyl. the firing order is 1,2,3,4 front to back.the wiring of 4 cyl. is very straight forward. 1 to 1,2 to 2, 3 to 3, 4 to 4. i do not have wiring diagram on v6 though.
Go to Chrysler they can get the book for you cheap