0
What else can I help you with?
How would a ammeter be connected in a circuit?
An ammeter is always connected in series in the circuit.
How to remove Ford Ranger rear window?
How to remove 2000 ford ranger rear window. Need to replace would like to replace with a sliding window need instructions how to do it
How would a voltmeter be connected in a circuit?
In parallell.
What would be a basic electical circuit?
a battery and a resistor connected together.
What would drop the amps on 220 plug?
The amperage on a circuit is governed by the connected load. If a load changes its current draw it can be detected by an amp meter connected to the circuit.
What is open circuit voltage when load is connected?
As load is conected in circuit , so thre is no open circuit therefore there would not be any open circuit voltage.
In the circuit if the fuse of lamp S went out which lamps would remain lit?
If the fuse of lamp S went out, the lamps that remain lit would depend on how the circuit is configured. In a series circuit, all lamps would go out since the circuit is broken. In a parallel circuit, only the lamp connected to the same fuse as lamp S would go out, while the other lamps connected to different fuses would remain lit.
Are the circuits at homes connected in series or parallel and why?
They're connected in parallel, this is so that everything connected to the circuits will receive the same voltage. Also, if everything was connected in series, if one of the components died, everything would be dead (think of christmas lights)
Why would never measure resistance in a circuit carrying a current?
If the circuit is carrying current then that means that the load (resistance) is in the circuit. if an ohm meter is connected in the live circuit then there would be some voltage drop at the ohm meter but as the meter has very less resistance, this would damage the instrument.
What would you conculde if you saw if one bulb burned and all lights fail?
The bulbs are in connected series. There was a short circuit and the circuit breaker tripped.
Why doesn't LC circuit exist?
even though a resistance is not connected in a circuit, it would practically have small resistance due to its components.so practically a LC circuit dosent exist..only a RLC circuit exists
What components do you need to make a simple series circuit to light on bulb?
You need a Battery, Light Bulb, Ammeter, Switch.
