your brakes will still work fine but your abs will not work your abs stands for anti lock bake system meaning when you drive on snow or something slippery you will still have control of your car when you slam on your brakes. but anyways in my s10 blazer it is a 96 but should be the same there is a red wire that plugs to the positive pole on the battery if it is not pluged in the abs light comes on and your abs will not work but your bakes work fine just try to find that wire there should be 3 wires going to your positive post the fat on goes to the starter and a little one goes to your altanter and the other is for your abs hope i helped
it is a code triggered in abs wheel sensors or the dump valves not working right also check the voltage at the abs fuse.the light stays on with codes triggered till you fiix or clear the codes.check fluid level
It could be low on brake fluid, a sign of trouble. Have the brakes checked SOON!
ABS means Anti-lock Brake System. If the light is staying on, you probably need to have your brakes checked.
if it flashes when using brakes, nothing is wrong the system is doing what it should. if the light is always on, the system needs repair.
too warn you that something is wrong with the brakes like you need calipers or pads
Usually this a faulty signal light switch. The Signal light switch disconects the brake light on the signaling side and makes it flash.
It is one because there is a problem with the ABS (automatic braking system). You need to have it checked. The brakes could possibly fail without warning.
it means get your brakes fixed xD
It is computer controled and not adjustable, Wrong answer, it is adjustable. I have a 94 s-10 blazer, and have set the timing more than once. Timing light and wrench to loosen the distributer.
Bad ground, usually at the rear lights.
did you check the oil level yet?
Means that your car believes there's something wrong with the brakes.