0
What else can I help you with?
Why would brake lights not work on 2002 Chevy Suburban when fuse switch and bulbs are good?
No brake lights but turn signals work? Turn signal switch brakes route through it.
Why do the brake lights come on and off as they wish on your 1999 Chevrolet Suburban?
Replace brake light switch.
96 Chevy Suburban no dash lights and no tail lights Any suggestions Turn signals brake lights etc work fine?
my 98 suburban did the same thing. when i changed my headlight switch that turns them off and on, they started working again.
Why would cause the brake lights not to work on 2002 Chevy Suburban if the bulbs and fuse are good?
Bad switch.
Why don't my dome lights turn off on my 1998 Chevrolet Suburban?
Either your headlight switch is turned all the way to the left or you have a defective door switch.
How do you disable the hazard lights on a 1997 gmc suburban?
To disable the hazard lights on a 1997 GMC Suburban, simply press the hazard light switch located on the dashboard, which is typically marked with a triangle symbol. If the lights do not turn off, check if the switch is stuck or malfunctioning and try pressing it multiple times. If issues persist, consult the vehicle's manual or a mechanic for further assistance.
Draw a circuit diagram showing how the switches could turn 8 lights on and off but witch 1 switch?
To achieve control of 8 lights with a single switch, you can use a series circuit layout where all 8 lights are connected in parallel to a single switch. When the switch is closed, current flows through each parallel branch, turning on all the lights simultaneously. The switch can be placed at the beginning of the circuit, connecting the power source to all the lights. This configuration allows for simple control with just one switch to turn all lights on or off together.
How do you repair instrument panel lights that doesn't turn on on a 1995 GMC Suburban?
To fix the 1995 Suburban instrument lights, check the light fuse first. Check the light switch. If these are ok, then check the instrument cluster for proper power and ground connections.
How do you Turn Daytime Running lights off on 2002 suburban?
hit your dome light on/off switch 4 times...it says how to do that in your manual
Why would Chevy Suburban dash lights running lights and high beams not work even though the fuses are good?
The headlight switch may be bad. Try replacing. Its the Headlight switch. The switch has a built in Circuit Breaker that self resets. It has become bad and will eventually give it up.
Why do your bright lights work and not your regular lights on your 1993 gm suburban?
Do you flip the hi beam switch and it's still on hi beams or no head lights are on in the switched position/ Find the headligh relay and swap it out with a another relay
Brake lights out on 1997 Suburban fuse is good Tail lights turn signals and hazard lights work I checked the fuse its good?
check the brakelight switch. it is located under the dash where the brake pedal rests. Hey its ritchie. If you can click your blinker down and then they work its you blinker switch,but this is my monte.
