Hi You need to shim outside bolt on starter, go to parts store and get starter shims. Might have to shim till it sounds right. The teeth on starter have to mesh in center of fly wheel or close.
Sounds to me like when it was installed they jumped 12volt straight to the accessory wire because they didn't feel like hooking up another second accessory to the brain or the remote starter is malfunctioning and the remote starter relay is keeping that accessory wire engaged
There are a few websites which offer unbiased reviews of the '66 Chevelle. Some of the most popular include Motortrend, Car Gurus and Second Chance Garage.
The proper way to connect a second starter wire depends with the configuration used.
Check your flywheel ring gear. I had a similar problem with my mower and found excessive wear on both the starter drive and ring gear. Be sure to check all the way around the ring gear, mine was only worn in one small area.
If the starter is evolved to at least its second form then ditto and the starter will have an egg.
There isn't a second set of starters.
First, check the ground to the starter and confirm that you have power to the starter. If you do, the starter should work fine. Second, you can always remove the starter and check if the gear can spin and the spindle depresses at all. If not, replace the starter.
u talk or find steven in saffron city and he will give u a starter Pokemon
starter is mainly provide to supply of second electrode in a tube&and also resist the starting current.gopi
i got a quote for 380 dollars with a second hand starter
cant
No