First
The first syllable (pow-) is the stressed syllable in power.
The stressed syllable in the word "power" is the first syllable, "pow."
Yes, the first syllable in power is stressed
The first syllable in "power" is stressed: POW-er.
The first syllable in the word power is stressed. (pow-er)
The stressed syllable in the word "power" is the first syllable, "pow-". This is because in English, two-syllable words like "power" typically have the stress on the first syllable. The unstressed syllable in "power" is "-er".
2 pow-er
First calculate the power: P = I2R. Power will be in watts. Then multiply power x time to get the total amount of energy transferred. If the time is in seconds and the power in watts, the energy will be in joules. (In this case you need to convert the time to seconds first.)
The power required to do 60 joules of work in 20 seconds is determined by the formula: Power = Work / Time. Therefore, Power = 60 joules / 20 seconds = 3 watts. So, 3 watts of power is necessary to do 60 joules of work in 20 seconds.
which power of a telescope might be expressed as "0.5 seconds of arc"?
Power = energy/timeWatts = joules/seconds(79.3 joules/37.2 minutes) x (minute/60 seconds) = 0.03553 watt= 35.53 mW = +15.5 dBm (rounded)====================To answer the question:(79.3 joules/37.2 minutes) x (minute/60 seconds) x (horsepower/745.7 watts) = 0.0000476 HP (rounded)47.6 microhorsepower(power output of 47.6 microhorses)
Power is calculated as energy consumed per unit time. If a bulb uses 3 joules of energy every 10 seconds, its power can be calculated using the formula: Power (in watts) = Energy (in joules) / Time (in seconds). Therefore, the power of the bulb is 3 joules / 10 seconds = 0.3 watts.