bull
horse
donkey
camel
I was carrying the load up the hill.
Yes, here is an example....... I was carrying the load up the hill.
Pulling a trailer requires more energy than carrying a heavy load.
When carrying a load up a ramp, your forks should be pointed uphill to prevent the load from sliding off. When carrying a load down a ramp, your forks should be pointed downhill to also prevent the load from sliding off.
A wall that bears the load of a roof, floor or another wall above it, is carrying a load other than its own weight and is called a load-bearing wall.
In electrical system load means circuit carrying current . Isolator is device which make on ( Connect ) and off ( Disconnect ) of circuit from supply. When load is ON means carrying current and required to disconnect from supply , than is called on load isolation.Here required on load isolator. When load is OFF means not carrying current and required to disconnect from supply , than is called off load isolation.Here required off load isolator. On load isolators design is more precise than off load isolator because while isolating load during ON states create heavy sparking and transient voltage spikes.
Overgrazing, or exceeding the carrying capacity.
The load arm is the radius of the pulley. This is the distance from the fulcrum to the load-carrying side of the rope.
Your forks should be as close to the ground as possible when carrying a load to ensure stability and minimize the risk of tipping. When not carrying a load, your forks should be raised to the height recommended by the manufacturer to prevent damage to the forks and improve visibility.
The Edmund Fitzgerald was carrying a full load of taconite iron ore pellets.
The question itself is not correct.It should be what is the ultimate load carrying capacity of bored pile?Ans: Ultimate load carrying capacity of pile could be determined be conducting load test.Ultimate load:The load at which the pile continuously settle.orthe load at which settlement of the pile reaches 10 percent of its diameter
350kg