answersLogoWhite

0

  • 1

Remove first the negative then the positive leads from your battery, using an adjustable wrench to loosen the nut clamps.

  • 2

Open the fuse box door for your vehicle and, using the chart in your manual or the back of the fuse box cover, remove with a fuse holder the fuse for your Hornet car alarm.

  • 3

Pull the wiring from the back of this fuse slot, and follow it to your alarm control unit, if possible.

  • 4

Locate your control unit and cut all wires leading from it with your wire strippers/cutters.

  • 5

Unscrew any mounting screws holding the alarm in place. Remove the unit from your vehicle.

  • 6

Follow each of the wires that were cut in Step 4 to other locations in the vehicle, such as the ignition, horn, light switch or power locks, and remove the wiring from these locations, if you'd like. This is not a required step.

  • 7

Replace first the positive then the negative leads to your battery. Your Hornet car alarm is removed.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you reset a hornet alarm system?

how to reset hornet alarm,, cause my car can't start..alarm still active,,


How do you disable a viper alarm on a 1997 dodge ram truck?

The best way to disable a Viper brand alarm is to remove it completely and put all wiring back to the stock locations.


How do you completely disarm the alarm in a 1987 Chevy blazer - it keeps draining the battery?

what alarme is it find the wiring digram and remove the fuse


How do you completely disconnect the alarm permanently on a 1993 Maxima?

Pull the fuse. Answer---Remove bottom half of driver side dash. there is a white box marked anti-theft remove the plug connected to it and also the other box that is on that bracket and its completely disconnected.


How do you disable a 1993 Nissan Pathfinder car alarm?

On a 95, which I believe should be the same, remove the fuse box (two screws), then behind that should be another black box, unscrew it and pull the fuse. This completely disables your car alarm.


How do you get your alarm system off your Toyota Cressida when the alarm came with the car?

Remove the fuse.


How do you bypass the factory alarm on a 1993 Buick Park AV?

The easiest way to disable your 1993 Buick factory alarm is to remove the alarm fuse. The alarm fuse can be found in the fuse box.


Why would you all of a sudden have a large amount of hornets show up?

Hornets may suddenly appear in large numbers if they are attracted to a food source nearby, if their nest has been disturbed, or if reproductive activity is at its peak during certain times of the year. It is important to identify and remove the attractant or nest to prevent further infestations.


Where can you get installation guide for a hornet 718m car alarm?

You can find the installation guide for a Hornet 718M car alarm on the manufacturer's official website or by searching for it in the support or downloads section. Additionally, you can check online forums, automotive security websites, or platforms like YouTube for video tutorials and user-shared installation guides. If you have the original packaging, it may also include a printed manual.


Where are the car alarm sensors on a 1990 240sx?

How do you remove the car alarm from 1990 240 Nissan?


How do you fix your audiovox car alarm because it keeps going off?

remove the alarm fuse


What is the best brand of car alarm?

SecuriLock ,SmartKey, Lojack ,OnStar , UnBREAKable Auto Lock, Viper, Hellfire, Cobra, and Hornet are some of the popular brands.