answersLogoWhite

0

There has to be a minimum of at least four nuts or bolts holding that seat in place. It should be secured at each corner.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you remove the front bench seat on a 1964 Ford Falcon?

two nuts from under the body removed the seat track - easy as pie !


How do you remove the front bench seat of a nova?

To remove the front bench seat from a Chevy Nova, first, slide the seat all the way back and locate the mounting bolts at the base. Use a socket wrench to remove these bolts. Once the bolts are removed, slide the seat forward to disconnect any wiring for seat belts or power features, if applicable. Carefully lift the seat out of the vehicle, ensuring not to damage the interior.


How do you remove the front bench seat of a 1965 mercury comet?

To remove the front bench seat of a 1965 Mercury Comet, start by locating the bolts securing the seat to the floor. Typically, you'll find these bolts at the front and rear of the seat tracks. Use a socket wrench to remove the bolts, then gently lift the seat out of the car, taking care not to damage any surrounding components. If the seat is stuck, check for any additional fasteners or clips that may need to be removed.


How do you remove seat on suzuki boulevard c50?

You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.


How do you remove front sight mosin nagant?

There are 2 pins that must be removed.


How do you remove the front grill on a 2007 Chevy Tahoe?

To remove the front grill on a 2007 Chevrolet Tahoe the bumper will need to be removed first. After the bumper is removed, take off the four screws and clips holding the grill in place. The grill is then ready to remove.


How do you remove back seat of a 95 nisan altima?

There are two 14mm bolts along the bottom front of the bench portion of the back seat that should be removed first. After removing the bench portion there are two 10mm bolts on the bottom left and right side and also two 10mm bolts behind the armrest/trunk access door. After removing all four bolts, lift up and out to remove.


How do you remove the bench seat of a 73 ranchero from the track it slides on?

To remove the bench seat from a 1973 Ranchero, first slide the seat forward to access the rear mounting bolts. Use a socket wrench to remove these bolts, then slide the seat back to expose the front bolts and remove them as well. Once all bolts are removed, gently lift the seat upwards to detach it from the track. Be cautious of any wiring or seatbelt connections that may need to be disconnected before fully removing the seat.


How do you remove the front rotor from 2004 Sunfire?

pull the wheel off, remove the two caliper bolts, remove the caliper and the rotor can be removed


How are the front speakers on a 1995 Buick Skylark removed?

remove cover, unscrew, disconnect


How do you change the front seal on an automatic transmission in a 1996 dodge Dakota?

you have to remove trans.after trans is removed remove tork.conv.check bushing in front pump you will find that it is bad


How do you remove a front bench seat from a 1972 2 door Dodge Dart Swinger?

Just unbolt the seat from the floor and pull it out.