It'll fit, but those big combustion chambers will probably reduce the compression ratio to an unacceptable level.
Yes.
yes but it has to be 83 or newer
yes all sbc manifolds will fit, when you get to cyl heads then you will have trouble since most aftermarket are for 350 bore which is larger
It should work well.
Yes. No problem.
the water jackets are different , the motor will keep running hot
yes... some rs camaros came with a 305 and the only difference between the 267, 289, 302, 305, 307, 327, 350, 400 sbc is the stroke and bore. the block itself is essentially the same.
A 350 SBC with aluminum heads and intake would weigh approximately 450-500 lbs. Adding carburetor, headers, alternator, water pump, and other accessories would increase the weight to around 500-550 lbs.
there is no adapter. vortec heads were cut at a diffrent slope than standard sbc heads. you can swap the heads on the 78 350 for vortech heads or get a multipoint fuel injection intake for a 85 - 95 350. you can get the intake from summitracing.com You will have to swap the heads and the intake
There are a variety of places where one can purchase SBC aluminum heads. One can purchase SBC aluminum heads online on the eBay website, and other retailers as well.
ya...its a sbc...they all interchange