0
What else can I help you with?
What is a compatible automatic engine and gearbox for a vw beetle 1973?
any engine carburated i would go with the 1600
Dose 2000 Audi a4 gearbox fit aircooled beetle engine?
No. You really aren't serious, are you?
How do you change a clutch on a Perodua Nippa?
You have to remove the engine and gearbox. you will need a engine crane. Once you have the engine and box out, remove gearbox from engine and replace clutch, Refit gearbox to engine, put engine and gearbox back in car. Easy job if you have access to a engine crane.
Is a clutch change on a fiat coupe twenty valve turbo an engine out job?
No. You can remove the clutch and gearbox with the engine in-situ.
1967 Volkswagen Beetle How do you change the radiator?
A 1967 VW beetle doesn't have a radiator you nit wit, ITS AND AIR COOLED ENGINE!!!!!!!!
How do you change a gearbox on a citroen synergie?
To change the gearbox on a Citroën Synergie, start by disconnecting the battery and removing any components obstructing access, such as the air intake and drive shafts. Support the engine with a jack, then unbolt the gearbox from the engine and remove any associated mounts. Carefully lower the gearbox and replace it with the new unit, ensuring all connections are secure before reassembling the components. Finally, refill the gearbox with the appropriate oil and reconnect the battery.
How do you change idle on new beetle?
You can't - it's controlled by the engine management system.
Is the engine in the front or back for a 1999 vw beetle?
The engine in a 1999 VW Beetle is located in the front. Unlike the classic VW Beetle, which had a rear-mounted engine, the 1999 model is based on the Volkswagen Golf platform and features a front-engine layout. This change contributes to improved handling and interior space.
Will an skyline r33 gearbox fit on R34 engine?
The gearbox will physically fit, you need to change the clutch to a push type clutch however. If we are talking 5 speed gearboxes.
What is a function of the clutch in the vehicle?
The purpose of a clutch on a vehicle is to disconnect the drive of the engine from the gearbox (this would be required when the vehicle is stationary or to change gear). While the engine is running the crankshaft is continually turning, It is the crankshaft that turns the gearbox and via the gearbox the road wheels. Obviously there are times when the engine is running but drive is not required, The clutch is the mechanism by which this is achieved.
How do you change the clutch on a landrover discovery?
Well, I thought I'd have a go! Haynes recommend you take the engine out, but after seeing a post on LR4x4 I thought i'd follow it and move the gearbox back. I started the job a week ago, clutch is now in but I cannot get the gearbox back in place. So my answer is....... get someone else to do it! Yeah ive done 3 and always taken engine out from the point of view of lineing the engine/gearbox back up again. also when you change the clutch plates after removing engine make sure you renew the clutch fork. that is loacated in the gearbox housing, you will see it when you take the engine out.
How do you change the engine on a 91 Previa?
it is not too bad remove the gearbox then remove the engine mounting bolts and the fuel pipes unbolt the front prop-shaft unplug the engine wirering connection then comes out the same way down as the gearbox it will take about 5 hours tops
