0
A pre-alignment inspection reveals engine cradle misalignment Technician A says the vehicle may have been in a collision Technician B says a wheel alignment can correct for this condition Who is ri?
Wiki User
∙ 14y ago
Technician A MAY be right, but not 100%. The front cradle can become out of whack simply be hitting bumps after many miles and lots of torque.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is a HP 106 inspection?
To return a salvage vehicle to a regular title a HP106 must be done. The inspection is very detailed and requires a measurement on a frame machine, a alignment is required, inspection and certification of repairs, every thing must be better than required on a normal safety inspection. Where I live current rate is $1050.00 for the inspection, It is tough enough 80% fail first try
Why would tires often need aligned?
Technically speaking the tires do not require alignment. It is the wheels and their axles that are aligned. The reason is that the attachment points for the axles are constantly moving and incur wear. In addition, the axle's supports can be bent by the vehicle hitting a pothole or striking a curb. The resulting misalignment causes the wheels and tires to not track properly (all point in the same direction). This causes the tire to scuff as it travels over the road. This scuffing wears out the tire prematurely and increases the misalignment. So the simple answer as to why wheels/tires should be aligned is to save the tires from being worn out before their time.
How do you get a perfect alignment?
To get a more accurate alignment just follow these steps. 1) when an alignment is performed on a vehicle, either with a computer or doing it yourself. (without a computer) Always adjust camber and caster angles first (if possible). Always adjust toe angles last. 2) If doing a 4 wheel alignment always adjust the rear angles first, camber, caster, then toe. Then perform the front end alignment. this will help you perform a better alignment on any vehicle.
Can you get an alignment without balancing tires?
Getting an alignment without also balancing the tires means the unbalanced tired will just contribute to needing another alignment. Do both at the same time and save yourself unnecessary headaches later.
What is the cost to get an alignment?
On average a 2 wheel alignment runs about $50.00. If you get a 4 wheel alignment it will cost you $80.00 to $100.00. I used to work at a car dealer and we charged $130.00 for a 4 wheel alignment. Best advice shop around and make sure you get a warranty because sometimes the mechanic will not adjust the alignment right and you will have to go back.
Which technician would be used for an used car wheel alignment?
An alignment tech.An alignment tech.
What is the root word for misalignment?
The root word for misalignment is "alignment," which refers to the process of arranging or adjusting components in a straight line or correct relative positions. The addition of the prefix "mis-" changes the meaning to indicate a state of incorrect or faulty arrangement.
How do you align head lights after fitting a new front on a ford escort please?
If you have a state safety inspection, bring to inspection station for alignment
Is a 1999 dollar bill with the serial number out of alignment worth more then 1.00?
The value really just depends on how far out of alignment we are talking about. Severe misalignment sell for around $300. Minor ones might not even command a premium.
An auto technician who specializes in the service and repair of steering systems wheel balancing and alignment is called a?
an auto technician who specializes in the service and repair of steering systems wheel balancing and alignment is called a ya ur alot of help smrtas. i THINK its a front end specialist but im not totally sure.
What is a HP 106 inspection?
To return a salvage vehicle to a regular title a HP106 must be done. The inspection is very detailed and requires a measurement on a frame machine, a alignment is required, inspection and certification of repairs, every thing must be better than required on a normal safety inspection. Where I live current rate is $1050.00 for the inspection, It is tough enough 80% fail first try
What is the difference between axial and angular alignment?
Angular alignment: the relationship between 2 lines, planes, etc. that create an angle between them (as in the angle formed in the letter A). The correct angulation dictates if they are in alignment or not (e.g. if you want a wide A, with an angle of 60 degrees but you print a narrow A of 30 degrees you would say it's not aligned). Axial: there are 2 types - rotational and lateral. Rotational - e.g. - wheels of a car must be parallel. If they slant towards each other (facing either up or down) they are in rotational misalignment. Lateral - e.g. taking the same wheels, if front wheels are wider apart than normal, they are in lateral axial misalignment. Hope this helps.
Why will dropping an iron magnet on a hard floor make it weaker?
In case of iron there are domains which have been aligned facing one particular direction thereby making it as N-S magnet. As it is dropped then the alignment may get disturbed and so it makes the magnet weaker. Suppose we heat it then misalignment becomes enormous and so it would almost loose the magnetism
What causes excessive wear of rear tires on a front wheel drive minivan?
incorrect tire pressure? misalignment? carrying excessive weight? Some causes could be: * poor alignment * incorrect tire pressure * bad wheel bearings * overloaded vehicle
What is the single biggest cause of ball screw failure?
It looks like the single biggest cause of failure in ball screws is simple misalignment and bending. A telltale sign of this is if the operating torque is higher than it should be. Misalignment, which causes abnormally high torque, is probably the biggest cause. Check for bent screws or visually examine the screw alignment. Improper lubrication and dirty environments are also leading factors, as these can lead to poor running and high wear.
Do you need an alignment with new tires?
Not 100% sure, but if they were different style or brand, I'd say they had to be. It is always a good idea, however if the old tires wore evenly, the car didn't drift or pull with the new tires, then you could pass on the alignment and keep an eye on the way the wear. Rotate every 5-8000 miles. As a service center manager, I always suggest an alignment with the purchase of new tires for several reasons. 1. When your vehicle is in alignment you are preventing premature tire wear. This translates to $$ saved in the long run by not having to buy tires as frequently. 2. All vehicles' suspensions wear over a period of time, by having your alignment checked periodically you can prevent a worn part from becoming a broken or failed part. This is a simple safety issue in this regard. (The alignment technician should thoroughly check the suspension BEFORE doing an alignment to spot any conditions/parts that should be addressed.) 3. By keeping your car aligned you can increase your gas mileage and tire life. Last but not least, your mechanic/garage should provide you with a printout showing your alignment specs before AND after any adjustments have been made. Ask your salesperson/technician/manager to explain the printout and how it will affect your vehicle. Most shops will offer not to charge you if no adjustments were needed. ANSWER: NO! although it is recommended, putting new tires on your vehicle doesn't change the alignment, it will still be out of alignment, or in alignment when you put your new tires on.
What has the author Wade W Gunn written?
Wade W. Gunn has written: 'DOT test train program system instrumentation manual' -- subject(s): Alignment, Measurement, Railroads, Track, Track-inspection cars
