545RFE - Automatic Transmission Service Fill 2WD 5.2L (11 pts.)
Service Fill 4WD 6.2 L (13 pts.)
O-haul Fill 13.33 L (28.0 pts,) NOTE: Dry fill capacity depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.
42RLE - Automatic Transmission
Service Fill 4.0 qts (3.8 L)
Overhaul Fill 17.6 pts (8.3 L)
Note: Dry fill capacity Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.
How do I get to the flywheel bolts on a 98 dodge dakota to remove a transmission
Overdrive might not work on a 1992 Dakota because there is a problem with the transmission. The shift solenoid or a belt is not functioning properly inside the transmission.
12-15 quarts
Mopar® Manual Transmission Lubricant is recommended or equivalent for use in the manual transmissions
· Onida, South Dakota
It has two filters in the oil pan
4 quarts.
Read your owner's manual. Your Dakota has a capacity of between 4-5 qt depending on what transmission you have. Gregg
The Dakota 4.7 take ATF +4 fluid, not Dexron or Mercon. The capacity for a 45RFE transmission is 14 quarts after a complete drain. Otherwise, it is 10 quarts for a complete drain, or 4 quarts for a filter replacement.
If it will not go into gear you have probably missinstalled one of the filters.
change both filters and be sure both are tight
i changed my 1999 Dakota speed sensor its located on the bottom of the transmission very easy to change be careful when you lossen sensor oil is gonna come out
The towing capacity of a 2000 Dodge Dakota V6 is about 7500 pounds. The Dodge Dakota was discontinued in 2011.
6 quarts filter service. Aprox 12 quarts dry fill. Answer #2 Filter service is about 3 1/2 - 4 qts.
The Dodge Dakota transmission blueprint is also known as a transmission diagram. The transmission diagrams can be found at most Dodge dealerships.
what type of auto transmission is in a 89 dodge dakota 3.9
it has changed by the manufacturing of goods