0
If it's alkali then you'd have to use a neutralizer, like water, ammonia or baking soda, prior to painting. The pH of the surface has to be below 10 prior to painting.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How can you get paint to stick to your cement when cement gets wet when humid?
Paint it when it is not humid. If it's a bathroom, avoid using it to take a shower for a day. As long as you can get a four hour window where the surface isn't wet, you should be fine.
Can you paint fiber cement roofing sheets?
Yes you can. Use a 100% Acrylic paint designed for exterior use. If you want a clear coat, there are many that will bind the gravel down, extending the life of the roof. Expect to get about five years out of the color and about three years out of the clear, before you recoat the surface.
Why do you apply cavity varnish on gic cement?
To prevent the cement from: - Dehydration of cement, which prevents - Cracking of cement, which avoids, - Discoloration of cement Additional note: - Since GIC is a water based cement, it is sensitive to water so exposing the GIC is also unwise in the sense that it might get contaminated with water, hence over-hydrating the cement and affecting its physical properties - Note that the varnish is applied during the initial phases of GIC setting reaction to allow it to set comfortably, which means right after placement and before polishing - Also note that some authors say that the polishing burs or any instruments that will be used for instrumentation on GIC should be applied vaseline on their working ends
What is the difference between cement paint and cement based paint?
Acrylic or epoxy based paint for cement surfaces is called cement paint.Cement that includes acrylic or epoxy to coat surfaces is called cement based paint.
What is solid plastering?
Solid plastering is the occupation of covering surfaces and producing a finish ready for painting. There are several methods including but not limited to; Sand Finish - cement based product that is "floated" then "sponged" to produce a flat and sandy finish
What is the purpose of cement neutralizer?
Most finishes require a neutral surface to adhere properly. This takes the surface from the alkaline or acidic state to the preferred preparation to accept finish.
What is waterproof cement?
Waterproof cement is cement that is waterproof. It can be applied to a surface without being affected if it was touched by water.
What is the gravity at earth surface?
concrete and cement
on which surface can a snail move fastest dirt cement or grass?
Snails move faster on dirt cement
Can you use white cement as painting?
Yes you can use white cement or grey cement as an exterior paint coat it will last 25+ years, you can add powder pigments to it to choose any color you like
Why is the surface of your 1 year old cement driveway crumbling?
The cement may not have been sealed properly, which would allow water to seep in the small cracks. In the winter the water freezes and expands causing the cement to crack and crumble. the finish on the concrete was not done correctly.trowel finished pushing the stones down from top of surface then sealed. concrete setting up before finish steps done.
What surface makes a tennis ball bounce higher?
cement
What is a driveway surface called?
blacktop tar cement pavement
How do i do the preparation on new comcrete before tiling it?
The concrete preparation must be seen to carefully before laying tile. The initial surface must be very clean and the cement laid out as smoothly as possible prior to tiling.
What is a gunite pool surface?
Gunite is a trowled-on cement coating similar to stucco.
What is the specific surface area of ordinary cement?
The cement SSA (specific surface area) usually is 350-400 m2/g, better to use one gas sorption analyzer to determine it---GOLD APP INSTRUMENTS.
What was used for building before cement?
wood or a straw
