OF COURSE, CERTAINLY, WITHOUT A DOUBT, DEFINITELY, PERFORMED EVERY SINGLE DAY, YEP . WHEN an open flame is not practicable such as hospital surroundings and Oxygen or flammable fuels are around. The Metal does not care what the heat source is just as long as you have enough AMPS /BTU to heat the base metal to accept the alloy Check out Rigid tools for example and look at Electric soldering
Rigid makes an electric soldering tool for soldering when an open flame is impractical like working in a hospital where there is flammable gases or Oxygen present.A regular type soldering iron may not get the fittings hot enough to allow for capillary attraction to draw the alloy into the fitting
niether it is a transition metal
salammoniac is used to clean and tin the soldering iron that solders the lead that holds the stained glass together.
Because it is a metal.
Iron ores are rocks and minerals clumped together while iron is the refined state.
Thre two types of soldering iron are straight and hatchet soldering iron
First of all, solder is metal alloy with a low melting point at 200 to 840 degrees Fahrenheit. A soldering iron is a tool used to metal solder to join two metal objects together. Therefore a stand for an soldering iron would just hold it. They usually have metal springs to hold the iron, obviously with a higher metaling temperature. This is a link to a picture of a soldering iron holder: http://www.qwikfast.co.uk/catalogue/images/silvsoldironstand427552.jpg
Tinning the Soldering iron is when the hot iron is coated with solder to aid in soldering and heat transfer
Soldering iron, solder, flux
The main tools for soldering include a soldering iron, a stand for the soldering iron, and solder. You'd likely use other tools such as brushes, picks, heat sinks, solder wick, desoldering irons, etc.
Solder. You'll need a soldering iron, for starters.
An electric heating element heats the tip just above the melting temperature of the solder being used.
The purpose of a cold heat soldering iron is to fuse electronic components, pipes and other metal materials together by melting solder as a connector which hardens as it cools. You can learn how a cold heat soldering iron works and it's different purpose at the HowStuffWorks website.
A soldering iron is a metal hand held probe type object heated by gas or electric for melting solder (a mixture of tin and lead). Solder is normally used for joining electrical wires and making soldered, leak proof, connections between pieces of copper pipe. It is however very hot, reaching temperatures of over 400 degrees Celsius. It is a tool (usually copper) that is heated and then applied to a joint to melt the solder and heat the metal so it will accept the solder. Some are heated by electricity some are heated in a small furnace. See "What is soldering iron" vipprogrammer.com/soldering-stations-manufacturers-36_116 it heats up your solder and makes it melt, it makes the joints in your circuit firm. it makes a little blob of solder.
Soldering iron is used in heating the metal for soldering. If you want to learn more about soldering iron visit en.wikipedia.org/wiki/Soldering_iron.
You can solder wires without a soldering iron using a lighter.
Soldering iron is characterized by having the melting point of the filler metal.