In Seattle a city crew is using steam and hot soapy water to remove paint (I presume latex) that was recently applied over a community mural. It seems to be working.
You cannot paint over slightly tacky latex paint with a water based polycyclic finish. You should always wait until the latex paint is thoroughly dry before painting over it.
I wouldn't recommend it. Some of the chemicals in the alkyd will dissolve the latex and the alkyd won't "stick". It's best to remove the latex using laquer thinner or xylene first.
When you've been using latex paint. Then clean them only in water.
If you are using latex, thin with water. If using enamel, thin with paint thinner.Always read instructions on the can. They always say what to thin it with.
Yes you can, but some people are more likely to have an allergic reaction to latex paint as one of it's properties reacts with human skin. I wouldn't personally advise it, but it is do-able.
The most effective methods for removing dried latex paint using a dried latex paint remover include applying the remover to the painted surface, allowing it to sit for the recommended time, and then using a scraper or brush to remove the softened paint. Repeat the process as needed until the paint is completely removed.
Using a paint conditioner with latex paint can improve the paint's flow and leveling, reduce brush marks, and extend drying time. This can result in a smoother finish and easier application, especially in hot or dry conditions.
You cannot paint over slightly tacky latex paint with a water based polycyclic finish. You should always wait until the latex paint is thoroughly dry before painting over it.
Yes
To effectively remove latex paint from a surface, you can use a few methods. One common way is to scrape off the paint using a putty knife or scraper. Another method is to use a chemical paint stripper specifically designed for latex paint. You can also try using a heat gun to soften the paint and then scrape it off. Be sure to follow safety precautions and instructions when using these methods.
I wouldn't recommend it. Some of the chemicals in the alkyd will dissolve the latex and the alkyd won't "stick". It's best to remove the latex using laquer thinner or xylene first.
When you've been using latex paint. Then clean them only in water.
Most latex paints are water based, and can be thinned and cleaned with the same. Refer to the can labeling for specific instructions for the paint you are using.
You didn't mention whether you were using latex or oil based primer and paint, but generally the point of using primer is so that you can paint over it with any form of wall paint. Just read the label on your primer can to make sure it is compatible. On the other hand, if you wanted to paint the primer over the satin gloss, you need to sand the surface lightly to remove the sheen of the paint and provide a suitable surface for the primer to adhere properly.
Using latex paint conditioner when painting can improve the flow and leveling of the paint, resulting in a smoother finish with fewer brush marks. It also helps to reduce the likelihood of paint drips and splatters, making the painting process easier and more professional-looking. Additionally, latex paint conditioner can extend the drying time of the paint, allowing for more time to work with it and achieve a more even coat.
When applying latex paint over oil-based paint, it is important to properly prepare the surface by cleaning it thoroughly and sanding it to ensure adhesion. Using a primer specifically designed for this purpose can also help the latex paint adhere better. Additionally, allowing the oil-based paint to fully cure before applying the latex paint can prevent issues such as cracking or peeling.
If you are using latex, thin with water. If using enamel, thin with paint thinner.Always read instructions on the can. They always say what to thin it with.