Yes
A laser cutter or water jet cutter will cut it without cracking it.
I know that Sylvania produces a shatterproof HALOGEN bulb, there may be incandescent variants, and GE most likely sells a shatterproof incandescent bulb.
to cut a glass tube you just need to rotate the glass against a glass cutter until the etch the cutter make meets the starting point. Then you tap gently against the inside of the tube along the etch the cutter made. In the late 70's and early 80's there were bottle cutters that did this so you could turn a normal glass bottle into a drinking glass.
You can cut vinyl and make stencils to use with paint or glass etching. You can cut fabric, felt and chipboard. You can cut out shapes to use on cards or scrapbook pages.
You will probably get a cut HOWEVER It may also get stuck where you sat on it.
Lead glass is made with lead oxide PbO this makes it dense. It also has a higher refractive index than ordinary glass. It is sometimes called "lead crystal glass" and has been used to make cut glass ornaments and decanters. There is a lead poisoning risk from drinking wine that has been stored for long periods in lead crystal decanters.
no
Very strong shatterproof plexiglass
Shatterproof glass was invented by Edouard Benedictus, a French chemist, in 1903. Benedictus discovered the strength of a glass flask with a cellulose nitrate coating that prevented it from shattering when dropped. This was the beginning of safety glass technology.
Yes, diamonds can cut glass. Glass can also cut glass.
Laminated glass is the best. As it breaks the plastic or vinyl between the two panes help the glass from flying around.
No, not entirely. But most ski goggles are close to shatterproof, yes.
Yes, perspex is a strong material known for its impact resistance and durability. It is often used as a shatterproof alternative to glass in various applications.
Key features of the ArmourLite Shatterproof Tritium watches include shatterproof glass that is almost 10 times stronger than many other watches. Tritium gas ensures that the markers of each watch will remain continuously illuminated for over 20 years. One can find out more information on these watches via the official ArmourLite website.
Shatterproof To the Grave - 2013 was released on: USA: 18 October 2013
I know that Sylvania produces a shatterproof HALOGEN bulb, there may be incandescent variants, and GE most likely sells a shatterproof incandescent bulb.
A diamond will cut glass -- an emerald will not.
No, emeralds are not hard enough to cut glass. Diamonds cut glass and they are the only gemstone with this capability.