If you are painting over a semi gloss paint you wand to use trisodium phosphate or TSP on the wall before you start painting. This is a deglosser that will allow whatever paint you are using to adhere to the wall.
tip: After using TSP on the wall, give it a soap and water wash to prevent the phosphate in TSP to cause mildew/mold damage.
Yes this should not be a problem. Satin paint makes a better base for instance then gloss paint. Always clean and sand the area you intend to paint.
Yes you can and it turns out beautifully!
Yes. You can paint semi-gloss latex paint over flat latex paint. It is not advised to paint over any latex with any oil-based paint. Nor is it advised to try and paint over semi-gloss paint with any other finish without first de-glossing the finish and priming.
Clear primer.
No, you can dull satin or semi-gloss but not the reverse.
At one time paint only came in a limited gloss range, flat, semi-gloss and high-gloss. The higher the gloss factor the harder the paint... the harder the paint the more washable it is. People used to only use high gloss or semi-gloss in kitchens and bathrooms so they could keep the rooms cleaner. These days, with the availability of a wider selection of gloss finishes and the tendency for people to paint more frequently, it is no long essential to use semi-gloss in your kitchen. I have been using a pearl luster paint successfully in kitchen for more than ten years with very good results.
No. You must sand the gloss of and them prime and then paint. Semi and High Gloss is only meant for wood not dry wall. Its the worst idea ever to put a gloss on dry wall. Any paint with an Enamel is just as washable.
Can I paint semi gloss over flat paint? Thanks!Barbara Phillips
Yes. You can paint semi-gloss latex paint over flat latex paint. It is not advised to paint over any latex with any oil-based paint. Nor is it advised to try and paint over semi-gloss paint with any other finish without first de-glossing the finish and priming.
semi gloss
no
yes you can, prep it first light rub down and apply two coats of the flat paint.
Clear primer.
Arson.
Semi-gloss paint most times exposes the metal of your car. It can lead to rust and erosion issues. Gloss paint is definitely the way to go.
Yes. You'll want to ensure that the surface is clean and gloss free prior to applying the flat topcoat.
No, you can dull satin or semi-gloss but not the reverse.
If you have the required satin or semi-gloss base product and pigment, you can.
By using rubbing compound