0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you use enamel spray paint to paint a bathtub?
Enamel paint can be used on porcelain or iron bathtubs with great results, so I'll walk you through this process, just in case you're unsure about how to do this.You Will Need These MaterialsWhite vinegar WaterTowel Palm sander 150-grit sandpaperRespirator mask Plastic bag Tape Epoxy enamel spray paint Oil based primer Oil based enamel paint 1200-grit wet/dry sandpaper InstructionsClean the bath tub thoroughly with a mixture of white vinegar and water. The vinegar will help remove any dirt or greasy residue on the tub. Rinse the tub to remove the vinegar and dry it with a towel.Equip a palm sander with 150-grit sandpaper. Sand the inside and the outside of the tub to roughen the surface, this will allow the paint to properly adhere to the bathtub.Remove the fixtures of the bathtub or cover the fixtures with a plastic bag. Tape the bag down at the base of the fixtures to prevent painting them when you paint the inside of the tub.Spray the inside of the bathtub with an epoxy enamel spray paint such as Krylon epoxy enamel paint. These paints are available at most home improvement stores and will resist moisture which is necessary for paint on the inside of a bathtub.5 Paint the outside of the tub with an oil based metal primer such as Rust-Oleum metal primer. Let the primer dry completely.Apply a coat of oil based enamel paint to the outside of the tub. Let the first coat of paint dry and then apply a second coat.Sand the second coat of paint with 1200-grit wet/dry sandpaper used wet. This will help shine the enamel paint.I hope this helps you out with your project! Good luck!--The Violet
Can spray paint be used on wrought iron railing?
You can use spray paint on wrought iron railing successfully as long as the proper preparation is done. Make sure the surface is clean and free of rust and scale, apply a primer to all bare metal, then apply several thin coats of the paint, ensuring solid coverage with no pinholes.
What is the best brand of paint for wrought iron?
Get expensive spray paint in the can, not the cheap stuff. And first scrub the iron of all dirt and put a thin layer of spray let it dry and repeat. Place cardboard behind the fence and tape up anthing that you do not want to become the color you are spraying. Very in expensive and easy to do yourself.
What kind of paint to use on rod iron furniture?
I
Can I paint galvanized metal garden furniture with cast iron paint?
Your best bet would be an exterior acrylic enamel. It will adhere to the galvanized and stand up to the elements well on your garden furniture. For the best looking furniture when you're done use spray cans...do not brush it on. Tip for using spray cans: soak the cans in warm water for 5 minutes before spraying. It will increase the pressure in the can and make for better spraying. Give it a try.
They are asking about how to pretreat a iron patio set.?
I would suggest that you scrub the furniture down with a wire brush to remove any rust and old paint first. Then make sure that your furniture is wiped clean so there are no dust particles left from the scraping. Now you are free to paint your furniture, however I would suggest that you use an outdoor Rust-oleum spray paint.
How do you seal an iron bird bath?
A nice coat of 'Rust-Oleum' paint will do the trick! -Invented by a sea-captain, so you KNOW it's good! See the related link below, please:
Can you use enamel spray paint to paint a bathtub?
Enamel paint can be used on porcelain or iron bathtubs with great results, so I'll walk you through this process, just in case you're unsure about how to do this.You Will Need These MaterialsWhite vinegar WaterTowel Palm sander 150-grit sandpaperRespirator mask Plastic bag Tape Epoxy enamel spray paint Oil based primer Oil based enamel paint 1200-grit wet/dry sandpaper InstructionsClean the bath tub thoroughly with a mixture of white vinegar and water. The vinegar will help remove any dirt or greasy residue on the tub. Rinse the tub to remove the vinegar and dry it with a towel.Equip a palm sander with 150-grit sandpaper. Sand the inside and the outside of the tub to roughen the surface, this will allow the paint to properly adhere to the bathtub.Remove the fixtures of the bathtub or cover the fixtures with a plastic bag. Tape the bag down at the base of the fixtures to prevent painting them when you paint the inside of the tub.Spray the inside of the bathtub with an epoxy enamel spray paint such as Krylon epoxy enamel paint. These paints are available at most home improvement stores and will resist moisture which is necessary for paint on the inside of a bathtub.5 Paint the outside of the tub with an oil based metal primer such as Rust-Oleum metal primer. Let the primer dry completely.Apply a coat of oil based enamel paint to the outside of the tub. Let the first coat of paint dry and then apply a second coat.Sand the second coat of paint with 1200-grit wet/dry sandpaper used wet. This will help shine the enamel paint.I hope this helps you out with your project! Good luck!--The Violet
Can spray paint be used on wrought iron railing?
You can use spray paint on wrought iron railing successfully as long as the proper preparation is done. Make sure the surface is clean and free of rust and scale, apply a primer to all bare metal, then apply several thin coats of the paint, ensuring solid coverage with no pinholes.
What is the best brand of paint for wrought iron?
Get expensive spray paint in the can, not the cheap stuff. And first scrub the iron of all dirt and put a thin layer of spray let it dry and repeat. Place cardboard behind the fence and tape up anthing that you do not want to become the color you are spraying. Very in expensive and easy to do yourself.
Use a spray wax on wrought-iron outdoor furniture once a year for extra protection.?
Wrought iron can rust if not properly maintained. If the paint, if it is painted and not powder coated, chips then rust could for on the exposed areas. Clean wrought iron with soap and water using a nonabrasive cloth and touch up any spots where the paint in chipping.
Who is the inventor of the bathtub?
John Michael Kohler invented the first enameled bathtub when he enameled a cast iron horse trough in 1883.
How do you drill a cast iron bathtub?
get a drill and some god nails
Can you scratch cast iron?
You can paint about anything. Depending on the temperature the iron is getting will say what type of paint you need. (there is special paint for engines) if the iron is going to get extremely hot, you might not find a sutable paint.
Why you do apply paint on iron article?
when we apply paint on iron articles moist air cannot attack iron and prevent rusting
Why is it useful for a steam iron to have a spray button?
Aside from steaming, a directional spray incorporated into the front of the iron can be handy on stubborn creases.
Did John Michael Kohler invent the enamel bathtub?
In 1883 he enamelled a cast iron horse trough, so yes, he invented the enamel bathtub.
