New unfinished furniture can be finished many ways. the answer your question will be determined by how you want the furniture to look, how much protection will the wood need against weather exposure ( indoors or outdoors) and how much time you are willing to put into the finish work. Stain by itself usually will not be enough unless the product you choose is a finish that has stain included in the mix.
No. Once you have varnish over the wood, stain will not penetrate. You can get colored varnish and try to darken it that way. I would get a lighter shade than what you want. All the varnish stains are put on white pine to get the samples. Since the wood is already stained, putting the color you want on now would cause it to be too dark.
You will need to rough the varnish up with sandpaper then use a bonding primer.
Yes, but why waste the varnish. - (it is meant for bare wood )
Varnish preserves wood better than paint.
You'll need to use some lacquer thinner and a wire brush to remove any varnish on brick.
No. Once you have varnish over the wood, stain will not penetrate. You can get colored varnish and try to darken it that way. I would get a lighter shade than what you want. All the varnish stains are put on white pine to get the samples. Since the wood is already stained, putting the color you want on now would cause it to be too dark.
It depends what kind of finish you will put on it, and whether it will be indoors our out: Indoors, latex paint: use latex wood primer Indoors, varnish: no primer required but can be stained, may need multiple coats Indoors, oil base: use an interior oil base primer Outdoors, latex paint: use an exterior latex wood primer Outdoors, varnish: no primer required but can be stained, use exterior varnish Outdoors, oil base: use an exterior oil base primer It depends what kind of finish you will put on it, and whether it will be indoors our out: Indoors, latex paint: use latex wood primer Indoors, varnish: no primer required but can be stained, may need multiple coats Indoors, oil base: use an interior oil base primer Outdoors, latex paint: use an exterior latex wood primer Outdoors, varnish: no primer required but can be stained, use exterior varnish Outdoors, oil base: use an exterior oil base primer
Wood stain MUST penetrate the grain of the wood or it doesn't color. clear coats like Varnish or Urethaneare designed to seal over the stain "color" & keep the wood from being "stained" by all the dirt & spills it endures over time. If you don't sand the old finish off evenly it will keep the new stain from penetrating and it will also allow the stain to penetrate in areas where the old varnish was worn or damaged but not in others making the new stain blotchy & uneven. A good quality urethane is far better and easier to apply than Varnish. .
To achieve a professional and long-lasting finish when applying varnish wood stain, it is important to properly prepare the wood surface by sanding and cleaning it thoroughly. Apply the stain evenly with a brush or cloth, following the wood grain. Allow the stain to dry completely before applying multiple coats of varnish, sanding between each coat for a smooth finish. Finally, protect the stained wood with a topcoat of varnish for added durability.
You will need to rough the varnish up with sandpaper then use a bonding primer.
Yes, but why waste the varnish. - (it is meant for bare wood )
Wood stain is a colored liquid that penetrates into the wood to change or enhance its color, while varnish is a clear protective coating that is applied over the wood to provide a glossy finish and protect it from damage.
Stains are meant to penetrate the pores of the wood. The varnish seals the pores of the wood. Stain applied afterword just does not work well.
What should I pay to have my trim stained? It will be dark so it may take more than one coat.
To effectively seal stained wood for outdoor use, you can use a waterproof sealant or outdoor varnish. Make sure to clean and sand the wood before applying the sealant, and follow the manufacturer's instructions for proper application and drying times. This will help protect the wood from moisture and UV damage, extending its lifespan outdoors.
Yes, you can apply epoxy over stained wood for a durable and glossy finish. Epoxy provides a protective layer that enhances the appearance of the wood and adds durability.
Varnish preserves wood better than paint.