It depends on the type of thread you are using and the gauge of your canvas and the stitch. Obviously the thread must pass easily through the canvas but have sufficient bulk to cover the canvas without it showing through (or grinning). Grinning is more of a problem with white canvas than with antique (brown) or a colour printed canvas.
For a typical mono canvas of 10-12 gauge when using tent stitch use one thread of tapestry wool or 3 threads of crewel wool. If using Persian yarn split it into 3 strands and use 2 at a time.
For 14 or 16 gauge canvas use 2 strands of crewel wool or 1 strand of split Persian yarn. For 18 gauge or smaller use just 1 strand of crewel wool or split Persian yarn.
For rugs on 8 gauge canvas, use Victorian cross stitch with one thread of tapestry wool or 3 threads of crewel wool. Or use tent stitch with two threads of tapestry wool or 6 threads of crewel wool.
For more information see http://www.needlepoint-tapestry.org.UK.
normal thread is used, the thread used in Tailor work. It is just the way they use it, it seems magic.
Beading thread is usually finer (thinner) and stronger than sewing thread. There are so many different kinds of sewing thread, it's hard to answer your question. Using the correct thread for the project is important in you want your work to last. You can get a sense of pride for a job well done.
Wind on the under thread, run the top thread, pick a type of seam and stitch length. Insert cloth, fasten the thread by a short run back & forth, then do your seam. Finish by short runs back & forth.
Wheel bearing won't have any threads. If your talking about the post they mount on, then you can use a pitch gage to get the number of threads per inch and then compare that to a thread chart to determine if they are coarse or fine.
A bobbin winder is the part of a sewing machine that takes the thread from a spool of thread and winds it on the bobbin. The sewing machine bobbin is a mini-spool of thread, made of plastic or metal, that holds the thread that will be on the underneath portion of your fabric when you sew. The top thread comes from the spool of thread and the thread on the bottom side of your fabric comes from the bobbin. Instead of winding the thread on the bobbin by hand, long and tedious, the machine will wind it for you if you load it up correctly. Check your owner's manual for instructions. If you don't have a manual, do a google search for it by entering the name of your machine branch and the model # and it will probably find one. Also, any experienced sewer can show you how.
to use a knitting machine for the girls only one you have to thread it on one needle and then not thread it on to the next then thread it on again then don't etc
Instructions for needlepoint, specifically Christmas oriented needlepoint are available at most local libraries. Also, many art and hobby stores carry kits that come with instructions.
Bolts are categorised by their thread size. The standard socket size for a bolt with a three quarter inch thread is 1 and one eighth inches. Heavy head bolts use a one and a quarter inch socket.
it's made out of milk
One-piece cranks use 1/2" thread
One-piece cranks use 1/2" thread
To use a needle and thread could be called sewing.To use a needle and thread could be called quilting. To use a needle and thread could be called embroidery. To use a needle and thread could be called suturing.
Basically no difference, except that process can use many threads; thread can use only one.
He lost the thread of his argument.
normal thread is used, the thread used in Tailor work. It is just the way they use it, it seems magic.
You use a thread to knot a quilt.
Two threads can interact with one another using the wait and notify methods. If one thread wants another thread to wait until it completes, it can use the wait method. similarly if it wants the other threads to know that it is done executing, it can use the notify or notifyall methods