Yes it does. Many oil based primers can be used as a flat paint also. Normally, the primer will cure too hard to be used as a primer coat within two weeks, but it is a hard, flat to low sheen surface. In fact, you can make a chalkboard paint in almost any color out of oil based primer if you let the surface cure for a couple of weeks. Enamel undercoater will not work in the same way though.
It depends on the paint and the manufacturer. Some flats have a slight matte-like sheen, however, in a paint line the matte sheen should have a higher sheen than the flat version, but a lower sheen than the eggshell version.
Base paint is also known as flat paint, or flat wall paint, or matt paint and is a latex paint. Flat paint is just that, flat or dull with no sheen at all. Semi-gloss is an enamel that dries very hard and can be found in a low sheen (satin) a medium sheen (semi-gloss) and a high sheen (high gloss) Flat paint is usually used on walls and ceilings where as semi-gloss is used in kitchens, bathrooms, doors an jambs because it helps hold back the inherent moisture in those areas.
It is water based paint that has no sheen to it and does not clean well. Usually used on ceilings.
If you have the satin, you can add flat paint and take some of the sheen off. This would have to be done before application. It will never be a true flat though.
Exteriors typically call for flat or satin and semi-gloss on trim.
It depends on the paint and the manufacturer. Some flats have a slight matte-like sheen, however, in a paint line the matte sheen should have a higher sheen than the flat version, but a lower sheen than the eggshell version.
Base paint is also known as flat paint, or flat wall paint, or matt paint and is a latex paint. Flat paint is just that, flat or dull with no sheen at all. Semi-gloss is an enamel that dries very hard and can be found in a low sheen (satin) a medium sheen (semi-gloss) and a high sheen (high gloss) Flat paint is usually used on walls and ceilings where as semi-gloss is used in kitchens, bathrooms, doors an jambs because it helps hold back the inherent moisture in those areas.
It is water based paint that has no sheen to it and does not clean well. Usually used on ceilings.
If you have the satin, you can add flat paint and take some of the sheen off. This would have to be done before application. It will never be a true flat though.
If you want to turn your satin paint into flat wall paint simply mix one to one. One gallon of flat to each gallon of satin. The flat wall paint will obliterate any sheen the satin once had.
The different sheen levels available for paint are flat, eggshell, satin, semi-gloss, and high-gloss. Each level offers a different level of shine and durability.
it is a very dull finish that doesnt reflect much light
Exteriors typically call for flat or satin and semi-gloss on trim.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
Doesn't the amount of varnish in the paint make the difference?
The two terms aren't comparable. Epoxies are normally a two-part coating that solidifies chemically instead of through evaporation; while enamel means that a paint dries to a hard and glossy finish.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.